Abstract:Single-crystal turbine blades, manufactured via investment casting, are key components of high-performance aero engines and gas turbines. The final dimensions of the blades depend on the cumulative effect of heat shrinkage at different stages, including the superalloy, mold shell, and ceramic core, etc. To clarify the effect of these stages on the blade dimensions, we first use the heat transfer coefficient calculated from inverse heat-conduction analysis to simulate the directional solidification. By extracting and mapping the final physical field from the previous stage to the next stage, four successive constraint removal processes are performed at different time points. Subsequently, we establish a time-varying model for the entire process of directional solidification and constraint removal. The errors of the extraction/mapping are consistently less than 0.002 mm in all three directions, thus confirming the feasibility of data transfer. Secondly, we analyze the dimensional deviation patterns of the casting after sequentially removing the mold shell, process rib, grain selector, and ceramic core constraints, with emphasis on the dimensional accuracy of the airfoil while disregarding the dovetail generated from machining. The final average deviations of Section 1, Section 2, and Section 3 of the airfoil are 0.1896 mm, 0.1723 mm, and 0.1909 mm, and the maximum deviations occur consistently at the trailing edge near the tip. Finally, three section deviations are validated via measurements performed using a vacuum furnace and industrial computed tomography. The results show that the proposed method improves the dimensional accuracy of hollow turbine blades.

Distortion Behavior of Hydro Turbine Blade Castings During Heat Treatment Processes under Variation of Seasonal Temperature

Distortion Behavior of A Heavy Hydro Turbine Blade Casting During Forced Air Cooling in Normalizing Treatment Process

A Real-Time Measuring Technology for Studying Distortion of Hydraulic Turbine Blade Castings During Heat Treatment Process

Three Dimensional Dynamical Measurement of Distortion of Heavy Steel Castings During Heat Treatment Process

Simulation and control of distortion of hydro turbine blade steel casting in heat treatment process

Surface Temperature Difference for Analysis of Distortion of Heavy Weak-Rigidity Castings During Heat Treatment

Dynamic Measurement of Temperature Field and Deformation in Hydraulic Turbine Blade at Cooling Stage of Heat Treatment

Statistics on geometric uncertainties of casting blades in low-pressure turbines

Stress Analysis and Deformation Prediction of a Heavy Hydraulic Turbine Blade Casting During Casting and Heat Treatment

Deformation Prediction of A Heavy Hydro Turbine Blade During the Casting Process with Consideration of Martensitic Transformation

Degradation Behavior of Microstructures and Mechanical Properties of GTD111 Turbine Blade After Long-Term Service

A way to control distortion of metal parts during heat treatment process

Stress analysis and deformation prediction of a heavy hydraulic turbine blade casting in heat treatment process

Microstructure Degradation of Service-Exposed Turbine Blades Made of Directionally Solidified DZ125 Superalloy

Through Process Numerical Simulation of a Heavy Hydro Turbine Blade Casting

Precision Measurement and Modeling of Quenching-Tempering Distortion in Low-Alloy Steel Components with Internal Threads

Optimization of the Cooling Process of a Heavy Hydraulic Turbine Runner Band Casting in Heat Treatment

Integrated Simulation of Castings Deformation during Casting and Heat Treatment Processes

Thermal Distortion Testing at Ferrous Superheat Temperatures

Study on deformation of large-scale hydraulic turbine blade during the casting process

Effect of constraint removal on single-crystal blade dimensions during investment casting