Abstract:High dimensional accuracy of the carbon fiber reinforced polymer (CFRP) composite parts has been a long-term challenge for manufacturers in the aerospace industry. Traditionally, the uneven curing temperature could aggravate the cure-induced distortion (CID) and should be avoided as much as possible. But even under an ideally uniform temperature field, the CID of curved parts still cannot be eliminated because of the anisotropic shrinkage nature of the CFRP laminate. In this work, a novel CID control method based on the multi-zoned heating methodology is proposed, which actively applies an optimized non-uniform temperature field in different zones of the part to counteract the CID influenced by geometric structures. The counteracting principle of the proposed method lies in that using the actively formed through-thickness temperature gradients in different zones generates numerous small local thermal deformations, and their combination can significantly reduce the overall CID of the CFRP part. A co-optimization framework combined with the numerical model and genetic algorithm is established to rapidly compute the optimized multi-zoned temperature field for the CFRP parts with arbitrary complex structures. A good agreement between the numerical and the previous experimental results shows the effectiveness of the numerical model, and the multi-zoned temperature field optimization case of a scaled air-intake CFRP part demonstrates the performance of the co-optimization framework. Finally, by using the multi-zoned self-resistance electrical heating method, the CID reduction of the proposed method is experimentally validated on a complex CFRP part, where the average displacement reduces by >60 % compared to that of the traditional oven process.

A way to control distortion of metal parts during heat treatment process

Simulation and control of distortion of hydro turbine blade steel casting in heat treatment process

A Real-Time Measuring Technology for Studying Distortion of Hydraulic Turbine Blade Castings During Heat Treatment Process

Three Dimensional Dynamical Measurement of Distortion of Heavy Steel Castings During Heat Treatment Process

Prediction of the Temperature of Large Framed Mold and Curing Deformation of Composite Components in the Autoclave Process

Distortion Behavior of A Heavy Hydro Turbine Blade Casting During Forced Air Cooling in Normalizing Treatment Process

Distortion Behavior of Hydro Turbine Blade Castings During Heat Treatment Processes under Variation of Seasonal Temperature

A Heat-Balance Method for Autoclave Process of Composite Manufacturing

Surface Temperature Difference for Analysis of Distortion of Heavy Weak-Rigidity Castings During Heat Treatment

Engineering the Accurate Distortion of an Object's Temperature-Distribution Signature

Study On Technology Strategies For Guarantee Machining Precision Of Large-Scale Integrated Aircraft Parts

Precision Measurement and Modeling of Quenching-Tempering Distortion in Low-Alloy Steel Components with Internal Threads

Modeling heat treatment of steel parts

Controlling welding residual stress and distortion by a hybrid technology of transient thermal tensioning and trailing intensive cooling

Active control of cure-induced distortion for composite parts using multi-zoned self-resistance electric heating method

Development of Estimation Procedure of Contact Heat Transfer Coefficient at the Part–Tool Interface in Hot Stamping Process

Optimization of the Cooling Process of a Heavy Hydraulic Turbine Runner Band Casting in Heat Treatment

The Efficient Way to Design Cooling Sections for Heat Treatment of Long Steel Products

Development of an Experimental Setup to Investigate Influences on Component Distortion in Gravity Die Casting and a First Variation of Temperature Control Strategy

Integrated Simulation of Castings Deformation during Casting and Heat Treatment Processes

Development of Efficient Distortion Prediction Numerical Method for Laser Additive Manufactured Parts