Abstract:High dimensional accuracy of the carbon fiber reinforced polymer (CFRP) composite parts has been a long-term challenge for manufacturers in the aerospace industry. Traditionally, the uneven curing temperature could aggravate the cure-induced distortion (CID) and should be avoided as much as possible. But even under an ideally uniform temperature field, the CID of curved parts still cannot be eliminated because of the anisotropic shrinkage nature of the CFRP laminate. In this work, a novel CID control method based on the multi-zoned heating methodology is proposed, which actively applies an optimized non-uniform temperature field in different zones of the part to counteract the CID influenced by geometric structures. The counteracting principle of the proposed method lies in that using the actively formed through-thickness temperature gradients in different zones generates numerous small local thermal deformations, and their combination can significantly reduce the overall CID of the CFRP part. A co-optimization framework combined with the numerical model and genetic algorithm is established to rapidly compute the optimized multi-zoned temperature field for the CFRP parts with arbitrary complex structures. A good agreement between the numerical and the previous experimental results shows the effectiveness of the numerical model, and the multi-zoned temperature field optimization case of a scaled air-intake CFRP part demonstrates the performance of the co-optimization framework. Finally, by using the multi-zoned self-resistance electrical heating method, the CID reduction of the proposed method is experimentally validated on a complex CFRP part, where the average displacement reduces by >60 % compared to that of the traditional oven process.

Active control of cure-induced distortion for composite parts using multi-zoned self-resistance electric heating method

Optimization Strategy for Curing Ultra-Thick Composite Laminates Based on Multi-Objective Genetic Algorithm

Enhancing the Forming Accuracy of CFRP through a Global Compensation Method by Introducing an Optimal Profile

An Efficient Thermal Cure Profile Design Method for Autoclave Curing of Large Size Mold

Prediction of the Temperature of Large Framed Mold and Curing Deformation of Composite Components in the Autoclave Process

Influence of Large Framed Mold Placement in Autoclave on Heating Performance

Self-resistance electric heating of shaped CFRP laminates: temperature distribution optimization and validation

A Heat-Balance Method for Autoclave Process of Composite Manufacturing

Numerical investigation of the effect of thermal gradients on curing performance of autoclaved laminates

Optimization of Cure Profile for Thick Composite Parts Based on Finite Element Analysis and Genetic Algorithm

Optimizing 5-Axis Tool Positioning and Orientation for Machining CFRP Curved Surfaces: Considering Fibers’ Orientation

Design Optimization of Molds for Autoclave Process of Composite Manufacturing

Temperature distribution analysis of carbon fiber reinforced polymer composites during self-resistance electric heating process

Partition Five-Axis Surface Machining of CFRP Laminate Structures Considering Fiber Orientation

Optimization of the curing cycle for the large-scale composite stiffened panel based on the response surface methodology and Fgoalattain algorithm

An induction curing technique for CFRP laminate via magnetic particle‐induced in situ heating

Numerical modeling for curing of unidirectional carbon fiber reinforced polymer based on micromechanics in Laplace domain

Differentiated heating of CFRP composite structures wirelessly using microwave and electromagnetic resonators

Coupled filling-curing simulation and optimized design of cure cycle in liquid composite molding

Simulation and Optimization of Mandrel-Heating Process for Composite Shells Using Internal Heat-Curing Method

A unique method for curing composite materials by introducing vibration treatment into the hybrid heating process