Abstract:There exists two different formulae at present for calculation of lateral torsional buckling moments of thin walled beams with monosymmetric I sections, one being traditional formula on which the structural steel Codes GBJ17-88 and GBJ18-87 are based, the other is the newly proposed one. This paper compares the stability theories from which these formulae were derived. New questions are presented for the newer theory. In order to answer these questions, this paper presents a buckling analysis of I sectional beams based on the stability theory of shells, which is absolutely superior to the member theory because fewer assumptions are used to establish the shell buckling theory. A total of 36 I sectional beams have been analyzed using the universal FEM program ANSYS, among which 12 have doubly symmetrical sections, 12 are tensile flange strengthened and 12 are compressive flange strengthened. The element SHELL63 is used in the analysis. The shell buckling analysis verifies that the traditional formula, but not the new one, seems to be more rational. This paper presents a new formulation of the lateral torsional buckling theory of thin walled beams under transversely distributed loads. The proposed theory, which is in good agreement with the results of shell buckling analysis, verifies the traditional formula and makes the traditional theory more perfect.

Flexural-Torsional Bucklinq of Cantilevers under Quasitangential and Semitangential Bending Moments: A Paradox

Elastic flexural-torsional buckling of thin-walled cantilevers

A New Derivation of the Buckling Theory of Thin-Walled Beams

Flexural–torsional buckling of thin-walled beam members based on shell buckling theory

Flexural-torsional Elastic Buckling of Tapered Beams with Simple Support

A General Theory for the Flexural-Torsional Buckling of Thin-Walled Members I: Energy Method

A Controversy and Its Settlement in the Calculation of Buckling Moments of Thin-walled Beams with Monosymmetrical I-sections under Distributed Loads

A General Theory about Flexural Torsional Buckling of Thin Walled Members

Elastic Flexural-Torsional Buckling of Doubly Symmetric Web-Tapered I-Beams

ON STABILITY OF I-SECTION STEEL CANTILEVERS

An Analysis of Current Stability Theories for Thin-Walled Members

BUCKLING OF TIMOSHENKO COLUMNS WITH LINEARLY VARIED RIGIDITIES AND AXIAL FORCES

Elastic Buckling of Inter-Braced Parallel Beam Systems

STABILITY OF DOUBLY SYMMETRIC I-SECTIONAL CANTILEVERS WITH DIFFERENT BOUNDARY CONDITIONS AT TIP

LOCAL BUCKLING OF I-SECTIONS IN COMPRESSION AND BENDING

BUCKLING AND THEIR SECOND-ORDER EFFECT OF DUAL SYSTEMS CONSISTING OF TWO SHEAR-FLEXURAL STRUCTURES

Lateral Buckling of Web-Tapered I-beams: A New Theory

Finite Element Modelling of Thin-Walled Members in Overall Stability Analysis

Member Moment Amplification Factors Due-to P-Δ Effect in Frames Braced by a Vertical Timoshenko's Cantilever

Buckling of Flexural-Shear Bracing System and Its Braced Steel Frames

MOMENT AMPLIFICATION FACTORS OF CANTILEVERS WITH VARIABLE AXIAL FORCES AND SECTIONAL RIGIDITIES