Abstract:Experiment simulation technique for ultra-high temperature,high heat flux and nonlinear aerodynamic thermal environment and corresponding extreme high temperature environment mechanical testing techniques are the key point in the design of hypersonic vehicle thermal protection material and structural safety,which is related to the success or failure of vehicle development.Principle and capability of a home-developed quartz lamp infrared radiation-based aerodynamic heating simulation system is introduced in this paper.This system is capable of producing nonlinear dynamic thermal shock process with heat flux of 2MW/m2,heating rate up to 210℃/s,and highest temperature up to 1500℃.A number of experiments were performed based on the home-developed heating simulation system.These experiments include but not limited to:(1) new method of insensitive to ambient light change active imaging digital image correlation was proposed.By using non-contact optical metrology,full-field high-temperature deformation can be measured up to 1550℃.(2) fracture property testing of composite material SiC/SiC specimen in thermal environment up to 1400℃ was accomplished.Some experimental studied are also demonstrated briefly in this paper,such as thermal-vibration test for wing structure of high-speed cruise missile and experimental and numerical investigation of heat-shielding properties of honeycomb panel structure in non-linear thermal environment up to 950℃.Above-mentioned aerodynamic heating simulation system and mechanical testing methods have great military engineering application values in the design of hypersonic flight vehicle and aerospace and aeronautics fields.

Design and preliminary experimental study on a high and low temperature system with helium gas in chamber

Design of Temperature Testing System in Multi-Parameter Combined Environmental Test

Experimental study on high- low temperature environment simulation chamber with helium gas convection and cooled by liquid nitrogen

Design of a Sub-Atmospheric Heat Exchanger for a Hundred-Watt 2 K System.

A review of technologies of temperature-adjustable heat sink

Numerical Simulation of 1.8 K–300 K Sub-Atmospheric Helium Heating Device

Study on Cooling Capacity Characteristics of an Open-Cycle Joule-Thomson Cryocooler Working at Liquid Helium Temperature

Design and experimental study of a high/low temperature visualization system in -196 ℃ to 100 ℃

Design and Experimental Investigation of a Cryogenic System for Environmental Test Applications

Thermal Design And Experimental Verification Of Double Helium Gap Conduction Test Facility

Experimental Research on Insulating Structure′s Heat Transfer Performance of a Temperature Simulation Test Chamber

Study on water cooler performance for high temperature helium experimental system

Numerical Simulations of Sub-Atmospheric J-T Heat Exchanger for Superfluid Helium Cryogenic System

Research on temperature uniformity simulation in a big low atmosphere pressure environment

Design and Analysis of Temperature Characteristic on a New Type Food Test Chamber

On the Experimental Simulation of Ultra-high Temperature,High Heat Flux and Nonlinear Aerodynamic Heating Environment and Thermo-machanical Testing Technique

Experimental research on insulating layer heat transfer performance of a low temperature test chamber

Design of High-Low Temperature Test Chamber Based on Semiconductor Refrigeration Technology

A Constant Temperature Box for Evaluating the Long-Term Performance of Scientific Instruments

Experimental Study on the Thermal Characteristic for the Cavity of a Novel Space Environment Simulator

Experimental study on a helium-4 sorption cryocooler