Abstract:Threads are small in size and complicated in structure, and cause great difficulty in finite element analysis of the nonlinear contact interaction. For this reason, threads are usually neglected during the strength simulation analysis of mechanical parts. In fact, parts bearing heavy cyclic loads usually fatigue and fracture from the internal threads, thus their fatigue strength is necessary to be checked in the design stage. To solve this problem, an approach based on stress conversion is proposed to analyze the high-cycle fatigue strength of the internal threads. In this approach, the stress at the thread roots is decomposed into near-source stress and far-source stress. The contact pressure and friction calculated from simplified model without threads are conversed into near-source stress and far-source stress and then superposed into the maximum stress of thread roots. Afterwards, taking the influence of stress gradient, survival probability and surface roughness into account, the fatigue safety factor of the internal threads are calculated employing Haigh diagram. Comparison is conducted between the proposed approach and the finite-element simulation and fatigue analysis of detailed model with threads, and shows the safety factor result of the proposed approach is 7.6% lower than the corresponding result of the detailed model. The proposed approach is also applied to a main bearing wall of a crankcase, its results is 8.2% lower than the fatigue test result, validating its feasibility.

Experimental Study and Finite Element Analysis on the Fatigue Strength of Torsion Shaft

Elastic Finite Element Analyses and Experiment Research on Welded Spherical Joints with Square Hollow Sections

ANALYSIS STUDY ON BENDING FATIGUE TEST OF AUTOMOBILE WHEELS

Calculation of Finite Element of Thermal Stress and Analysis of Low-cyclic Fatigue Life for Non-central Hole Rotor of 135 MW Turbine

Fine analysis of section stress of steel strand

FINITE ELEMENT ANALYSIS OF STIFFENED T-STUB CONNECTIONS

FEM-based Multi-field Coupling Stress Analyses of the Cylinder-bolts System in a Gas Turbine Power Plant

Component Structural Equivalent Research Based on Different Failure Strength Criterions and the Theory of Critical Distance

Theoretical and Numerical Analysis of the Fatigue Strength of Mechanical Material and Part under Uniaxial Stress

Static property analyses based on finite element method and torsion tests on carbon fibre composite motor drive shaft

Study on the working mechanism and behavior of centrifuge concrete filled-steel tubular(CCFT) members subjected to torsion

Experimental study on centrifuge concrete filled thin-walled steel tubular components under the action of torsion

Simulation and fatigue damage tolerance design of torsion bar under dynamic loads

Modeling and Simulation of Torsional Resistance of Hollow Shaft with Small Diameter Based on ABAQUS

Experimental and theoretical analysis for centrifuge concrete filled-steel tubular members subjected to bending-torsion

Fatigue failure analysis and finite element assessment of the twins torsion spring

FINITE ELEMENT SIMULATION AND TEST FOR FATIGUE LIFE OF COMMERCIAL VEHICLE DRIVING AXLE HOUSING

Fatigue Life and Strength Analysis of a Main Shaft-to-Hub Bolted Connection in a Wind Turbine

Finite Element Analysis for Flat Head Sleeve of Slipper-Type Universal Spindles and Research on Their Fracture Causes

Fatigue Failure Analysis of Shaft for NTK300 Wind Turbine

Stress-conversion-based Approach of High-cycle Fatigue Strength Analysis for Internal Threads