Abstract:Purpose : Establish a technique for simultaneous interrupted volumetric imaging of internal structure and time-resolved full-field surface strain measurements during in-situ X-ray micro-computed tomography (XCT) experiments. This enables in-situ testing of stiff materials with large forces relative to the compliance of the in-situ load frame, which might exhibit localization (e.g., necking, compaction banding) and other inhomogeneous behaviors. Methods : The system utilizes a combination of in-situ XCT, 2D X-ray imaging, and particle tracking to conduct volumetric imaging of the internal structure of a specimen with interrupted loading and surface strain mapping during loading. Critically, prior to the laboratory-scale XCT experiments, specimens are speckled with a high-X-ray-contrast powder that is bonded the surface. During in-situ loading, the XCT system is programmed to capture sequential 2D X-ray images orthogonal to the speckled specimen surface. A single particle tracking (SPT) or digital image correlation (DIC) algorithm is used to measure full-field surface strain evolution throughout the time-sequence of images. At specified crosshead displacements, the motion and 2D image sequence is paused for volumetric XCT image collection. Results : We show example results on a micro-tensile demonstration specimen additive manufactured from Inconel 718 nickel-chrome alloy. Results include XCT volume reconstructions, crosshead-based engineering stress, and full-field strain maps. Conclusion : We demonstrate an in-situ technique to obtain surface strain evolution during laboratory-scale XCT testing and interrupted volumetric imaging. This allows closer investigation of, for example, the effect of micro-pores on the strain localization behavior of additive manufactured metal alloys. In addition to describing the method using a representative test piece, the dataset and code are published as open-source resources for the community.

A Real-time Synchrotron Radiation CT System for Materials Analysis in Tension/Compression Testing

X-Ray Computer Tomography on Residual Stress Measurement

Development of a Four-Post Frame Integral Loading/rotating Device

Synchrotron radiation CT system for explosive initiator nondestructive examination

Cyclic Tensile Machine with Wide Speed Range for in Situ Neutron/x-Ray Scattering Study on Elastomers

A Tensile Tester for in Situ Synchrotron Radiation X-Ray Scattering Measurement of Structure-Property Relation

An Automatic Loading System for Rock Core Testing with an Industrial Ct Scanner

Wireless automatic loading test system for industrial CT based on virtual instrument

Research on the SR-CT Technique in Microstructures Testing During Dynamic Processes

Synchronous in-situ measurement for deformation and temperature fields with high spatial and temporal resolution under dynamic loading

Analysis and Calibration of Stage Axial Vibration for Synchrotron Radiation Nanoscale Computed Tomography.

A Technique for In-Situ Displacement and Strain Measurement with Laboratory-Scale X-Ray Computed Tomography

An New Instrument for Measuring Mechanical Compliance of Micro-Systems

Automatic loading testing system based on LabWindows/CVI for industrial CT

X-Ray Tomography System to Investigate Granular Materials During Mechanical Loading

Micro/Nano Topography Measurement Device for Samples under Coaxial Load

Real-time Measurement System for In-Plane Displacement and Strain Based on Vision

Instrumentation for real-time x-ray topography

Design and Application of a Miniature Pneumatic Bellows Loading Device for In-Situ Tensile Testing inside the Scanning Electron Microscope

An Off-chip Actuated Tensile Test Device for Microscale Mechanical Testing

Synchrotron CT Imaging of Lattice Structures with Engineered Defects