Abstract:In the field of condensed matter physics and materials science, it is of great importance to investigate the microstructures, properties and solidification regularities of liquid metals. In the last few decades, the theories of solidification of binary alloys, such as dendritic growth and eutectic growths have been built. Great progress has also been made on the study of monetectic and peritectic alloys. But a solidification theory on ternary quasiperitectic alloys has not been established up to now. The study of the solidification process of quasiperitectic alloys will provide a basic work for solidification theories of ternary alloys.The master alloy of Al-11.8Cu-24.22Mg was prepared from pure Al (99.99%), pure Mg (99.99%) and Al-54.2Cu in a resistance furnace under CO2 and SF6 (volume proportion is 40 : 1) atmosphere. The melted alloy (840-850 degrees C) was pouring into different quenching graphite crucibles at the same time, and the cooling curves were recorded by a sixteen channels temperature recorder. The graphite crucible was quenched into cold-water immediately for rapid cooling at the preplanned quenching temperature. After the experiment, the microstructures of the sample were analyzed by SEM, with EDS analysis.The experiment result indicates that the primary phase is identified as S (Al2CuMg) and the quasiperitectic phases are alpha-Al and T (Al6CuMg4). The solidification microstructure is composed of remnant primary phase, quasiperitectic phases, binary eutectic and ternary eutectic. Although the quasiperitectic phases and binary eutectic are composed of the same phases (alpha-Al+T(Al6CuMg4)), their structures are different. The former structure presents strip form and the later present dendritic form. The ternary eutectic reaction is suppressed and the remnant primary S phase is reserved in the matrix with non-equilibrating crystallization.

Study on Solidification Process, Microstructures and the Primary Phase of Peritectic Reaction of Mg70zn28y2 Alloy

Solidification of Mg-28%Zn-2%Y Alloy Involving Icosahedral Quasicrystal Phase

Growth and morphology evolution of icosahedral quasicrystal phase in Mg 30Zn 60Y 10 alloy

Growth and Morphology Evolution of Icosahedral Quasicrystal Phase in Mg_(30)Zn_(60)Y_(10) Alloy

Formation and Growth of Icosahedral Quasicrystal in Mg30Zn60Y10 Alloy

Solidification of Mg28zn2y and Icosahedral Quasicrystal Morphology Evolution

Solidification Mechanism of Ternary Quasi-Peritectic Alloy of Al-11.8cu-24.22mg

Effect of Zn and Y on microstructures and properties of normally-solidified Mg-Zn-Y alloys

Microstructure and Mechanical Properties of Mg-Xy-1.5mm-0.4zr Alloys

Microstructure and Phase Transformation of Forged Mg–3.7Zn–0.3Y–0.3Gd Quasicrystal Alloy

Investigation of the Non-Equilibrium Solidification and Microstructures of Al-Y Peritectic Alloys

Microstructures and morphology evolution of icosahedral phase of as-cast Mg67.4Zn28.9Y3.7 ternary alloy subjected to the pouring temperature

Growth morphology and evolution of icosahedral quasicrystal in Mg-Zn-Y ternary alloys

Microstructure and phase transformation of as-cast and annealed Mg–4Zn–1Y alloy containing quasi-crystal phase

Microstructure Evolution During Reheating of Extruded Mg-Gd-Y-Zr Alloy into Semisolid State

Solidification Pathways and Constituent Phases of Mg–Zn–Y–Zr Alloys

Microstructure Evolution and Mechanical Properties of Quasicrystal-Reinforced Mg–Zn–Gd Alloy Processed by Cyclic Extrusion and Compression

Microstructure and Interface Of Mg<sub>3</sub>Zn<sub>6</sub>Y Quasicrystal Particulate Reinforced Mg-8Gd-3Y Alloy

Microstructure and Interface of Mg3Zn6Y Quasicrystal Particulate Reinforced Mg-8Gd-3Y Alloy

Secondary Phases in Quasicrystal-Reinforced Mg–3.5Zn–0.6Gd Mg Alloy