Abstract:An effective design strategy for preparing highly transparent polyimide film with low dielectric constant is presented. The key to the strategy is to simultaneously introduce meta-substituted structure and trifluoromethyl in polymer chains. By using this design strategy, a highly transparent polyimide film with low-k was synthesized from 3,5-diaminobenzotrifluoride (m-TFPDA) and 4,4′-(hexafluoroisopropylidene) diphthalic anhydride (6FDA) through a two-step method. The obtained m-TFPDA/6FDA (CPI) film (∼30 µm) possesses high optical transparency (λcutoff=334 nm, T450nm=85.26%, Haze=0.31) and is close to colorless (L*=96.03, a*=−0.34, b*=2.12, yellow index=3.96). The intrinsic k and dielectric loss value of the film are 2.27 and 0.0013 at 10 kHz, respectively. More importantly, such low dielectric performance could remain stable up to 280 °C, and the film shows a low moisture rate (∼0.51%), which helps to maintain the low-k property stability in different humid environments. Meanwhile, the film also shows good thermal stability and mechanical properties, with a glass transition temperature (Tg) of 296 °C and the 5 wt% decomposition temperature (Td,5%) of 522 °C under N2. The tensile strength and tensile modulus of the film are 85.1 MPa and 1.96 GPa, respectively. In addition, the film is soluble in common solvents, which allows simple solution processing and low-cost, continuous roll-to-roll processes. This design strategy is beneficial to improving the transparency, lightening yellow color, lowering the dielectric constant and meanwhile maintaining the comprehensive properties of polyimide films, which is mainly due to the introduced meta-substituted and trifluoromethyl structures effectively inhibiting the transfer of charge transfer complex (CTC) effects and increasing the free volume of film. This design strategy could also be extended to other high-performance polymer systems.

A novel structural amorphous fluoropolymer film with an ultra-low dielectric constant

Porous Amorphous Fluoropolymer Films with Ultralow Dielectric Constant

Effects of thermal treatment on porous amorphous fluoropolymer film with a low dielectric constant

Xps Characterization of the Interface Between Low Dielectric Constant Amorphous Fluoropolymer Film and Evaporation-Deposited Aluminum

Structure characterization of carbon and fluorine-doped silicon oxide films with low dielectric constant

Synthesis of fluorine-containing poly (aryl ether) with low dielectric constant

Spectral Characterization of Amorphous Fluorinated Carbon Film with a Low Dielectric Constant

An amorphous SiCOF film with low dielectric constant prepared by plasma-enhanced chemical vapor deposition

Low—Permittivity Copolymerized Polyimides with Fluorene Rigid Conjugated Structure

Fluorine-terminated functionalized liquid metal/silicon carbide binary nanoparticles for polyvinyl alcohol composite films with high in-plane thermal conductivity and ultra-low dielectric constant

Tailored Ultralow Dielectric Permittivity in High-Performance Fluorinated Polyimide Films by Adjusting Nanoporous Characterisitics

Superior performance of multilayered fluoropolymer films in low voltage electrowetting

Application of Amorphous Zirconium-Yttrium-Aluminum-Magnesium-Oxide Thin Film with a High Relative Dielectric Constant Prepared by Spin-Coating

Thermal Conductivity of Polyvinylidene Fluoride Films with a Multi-Scale Framework

Low-dielectric-constant Α-Sicof Film for ULSI Interconnection Prepared by PECVD with TEOS/C4F8/O2

Flexible h-BN/fluorinated poly (arylene ether nitrile) fibrous composite film with low dielectric constant and high thermal conductivity fabricated via coaxial electrospinning hot-pressing technique

Synthesis and characterization of SiCOF/a-C:F double-layer films with low dielectric constant for copper interconnects

Highly Transparent and Colorless Polyimide Film with Low Dielectric Constant by Introducing Meta-substituted Structure and Trifluoromethyl Groups

Supercritical carbon dioxide foaming for ultra-low dielectric loss perfluorinated foam

Electron Diffraction Structure Analysis of the Amorphous Polytetrafluoroethylene Film

Ultra-low-permittivity, high hydrophobic, and excellent thermally stable fluoroelastomer/polyimide composite films employing dielectric reduction