Abstract:Transparent fluorinated polyimide nanofoams are prepared using CO2 foaming method. These nanofoams exhibit high optical transmittance (>85% in the 500–700 nm wavelength range) and low haze (≈18%). Additionally, they demonstrate superior mechanical and thermal insulation properties compared to conventional micron‐sized foams, maintaining remarkable mechanical flexibility and structural stability under harsh conditions, including extreme temperatures and water exposure. Transparent polymer nanofoams offer significant potential for thermal insulation, particularly for energy‐saving windows, where both transparency and low thermal conductivity are crucial. However, grand challenges remain in preparing polymer nanofoam monoliths with pore sizes smaller than 40 nm to achieve high optical transparency via minimized light scattering. Herein, the preparation of highly transparent nanofoam monoliths based on fluorinated polyimide (FPI) using CO2 foaming is reported for the first time. The high CO2 absorption capacity and robust melt strength of the FPI matrix significantly promote bubble nucleation while minimizing cell coalescence during CO2 foaming process, resulting in ultra‐small pore sizes down to sub‐10 nm. These FPI nanofoams, with a thickness of ≈0.2 mm, can exhibit high optical transmittance (>85% in the wavelength range of 500–700 nm) and low haze (≈18%), which is unprecedented for polymer foams prepared using foaming methods. Furthermore, these FPI nanofoams demonstrate superior mechanical and thermal insulation properties compared to micron‐sized FPI foams and maintain remarkable mechanical flexibility and structural stability even under harsh conditions, including extreme temperatures and water exposure. Transparent nanofoams prepared using a scalable CO2 foaming method can serve as the next‐generation thermal insulation materials, with broad potential applications in energy‐efficient buildings, and aerospace.

Supercritical carbon dioxide foaming for ultra-low dielectric loss perfluorinated foam

Ultralow Dielectric Constant Polyarylene Ether Nitrile/Polyhedral Oligomeric Silsesquioxanes Foams with High Thermal Stabilities and Excellent Mechanical Properties Prepared by Supercritical CO 2

Structural Regulation of Microcellular Thermotropic Liquid Crystalline Polymer (TLCP) with Low Dielectric Properties during Supercritical Fluid Foaming Process

SF6-Epoxy Foam Insulation Material with Ultra-Low Dielectric Loss: Morphological and Performance Control

Microcellular Long-Chain Branched Polyphenylene Oxide (PPO) with Excellent Comprehensive Properties and Comprehensive Analysis of Its Dielectric Properties

Poly (vinylidene Fluoride)-Based Microcellular Dielectrics Filled with Polydopamine Coated Carbon Nanotubes for Achieving High Permittivity and Ultralow Dielectric Loss

Achieving Ultrahigh Transparency and Superior Mechanical Properties in Flexible Polyimide Nanofoams Through CO2 Foaming for Thermal Insulation

Fluorinated graphene/polyimide nanocomposites for advanced electronic packaging applications

Ultrasound and H2O assisted scCO2 foaming technology for preparation of PS/PMMA composite foams with ultra-lightweight and super thermal-insulation

Perfluorocyclobutyl Aryl Ether-Based Poly(silylene Arylacetylene)s with a Low Dielectric Constant for Advanced Wave-Transparent Composites

Ultralow Dielectric Constant Polyarylene Ether Nitrile Foam with Excellent Mechanical Properties

Fluorine-Containing Flow Modifier for BN/PPS Composites Enabled by Low Surface Energy

Low Dielectric Polyimide/Fluorinated Ethylene Propylene (PI/FEP) Nanocomposite Film for High‐Frequency Flexible Circuit Board Application

Fabrication of Low Dielectric Constant Fluorinated Poly(arylene Ether Nitrile) Composites by Cross-Linking with Metal-Organic Frameworks

Mechanically Robust Fluorinated Graphene/Poly( p -Phenylene Benzobisoxazole) Nanofiber Films with Low Dielectric Constant and Enhanced Thermal Conductivity: Implications for Thermal Management Applications

Design of Bi-Modal Pore Structure Polyarylene Ether Nitrile/sio2 Foams with Ultralow-K Dielectric and Wave Transparent Properties by Supercritical Carbon Dioxide

Fluorine-terminated functionalized liquid metal/silicon carbide binary nanoparticles for polyvinyl alcohol composite films with high in-plane thermal conductivity and ultra-low dielectric constant

Low—Permittivity Copolymerized Polyimides with Fluorene Rigid Conjugated Structure

Tailored Ultralow Dielectric Permittivity in High-Performance Fluorinated Polyimide Films by Adjusting Nanoporous Characterisitics

Progress on Polymer Composites With Low Dielectric Constant and Low Dielectric Loss for High-Frequency Signal Transmission

Ultra-low Dielectric Constant Fluorinated Graphene/polybenzoxazole Composite Films with Excellent Thermal Stabilities and Mechanical Properties