Abstract:Preparation process and microstructure of CF/CNTs reinforcements and mechanical properties of their composites. Chemical vapor deposition (CVD) method was performed to grow carbon nanotubes (CNTs) on oxidized carbon fiber (CF). First, CF was oxidized by a simple and gentle way to increase the number of active groups and the optimal treatment time was determined. Then, effects of catalyst concentration and growth time on morphologies and loading amount of CNTs, the properties of CF/CNTs reinforcements, and the interlayer properties of CF/CNTs composites were explored. When the catalyst concentration and growth time were controlled at a reasonable level, CNTs can be uniformly grown on the CF surface. The interlaminar shear strength (ILSS) was characterized and the fracture surfaces of CF/CNTs composites were observed. The results demonstrated that when the catalyst precursor was kept at 0.05 mol/L and the growth time was controlled at 10 min, CNTs had the best strength effect and the ILSS increased by 30.25% compared to that of composites without CNTs. The fracture surface showed that CNTs can penetrate the matrix at the interface and enhance the interface through mechanical interlocking effect. The CNTs‐induced interphase allows the stress inside the composites to propagate continuously between resin and fibers, thereby heightening the load carrying capacity. Highlights A simple and gentle way was performed to activate CF without strength reduction. The influence mechanism of various parameters was revealed in detail. The mechanism of CNTs enhancing the interface was revealed.

In Situ Catalytic Growth of Carbon Nanotubes on the Surface of Carbon Cloth

Properties of Carbon Nano-Tubes–cf/sic Composite by Precursor Infiltration and Pyrolysis Process

In situ growth of CNTs on carbon fiber by chemical vapor deposition

One‐step in‐situ growth of CNTs on oxidized carbon fiber: Effects of catalyst concentration and growth time on mechanical properties of carbon fiber

Study of Controlled Growth of Carbon Nanotubes in Microstructures at Low Temperature

Non-destructive and controllable catalyst deposition of in situ growing carbon nanotubes onto the carbon fibre fabric

In situ growth of carbon nanotubes on inorganic fibers with different surface properties

Preparation and Characterization of a Graphite Electrode Containing Carbon Nanotubes Grown in Situ by Flame Synthesis

In Situ TEM Observation of the Gasification and Growth of Carbon Nanotubes Using Iron Catalysts

Catalyst-Free in Situ Carbon Nanotube Growth in Confined Space Via High Temperature Gradient

Preparation of in-situ grown carbon nanotubes via dithiocarbamate in composites with excellent microstructure and mechanical performance

Preparation of Carbon Nanotubes at the Surface of Fe/SBA-15 Mesoporous Molecular Sieve

In situ growth of carbon nanotubes on graphene oxide fibers by thermal chemical vapor deposition

Carbon fiber-promoted activation of catalyst for efficient growth of single-walled carbon nanotubes

Carbon Nanotube Synthesis and Parametric Study Using CaCO3 Nanocrystals As Catalyst Support by CVD

In Situ Carbon Nanotube Synthesis by the Reduction of NiO/γ-Al2O3 Catalyst in Methane

Catalytic CVD growth of carbon nanotubes by electric heating method

Study on Carbon Nanotubes of Pyrolysis Carbons P for In Situ Catalytic Formation on Expanded Graphite Surface

Nitrogen-doped carbon nanotubes synthesized with carbon nanotubes as catalyst

Mechanism of carbon nanotube growth in expanded graphite via catalytic pyrolysis reaction using carbores P as a carbon source

In-situ growth of scaly carbon nanotube by Cu@Ni core-shell catalyst on continuous carbon fiber surface for multiply tenoned composite interphase