Abstract:Falling film type condensers/reboilers applied to cryogenic air separation units (ASUs) have drawn more attentions in recent years. This paper presents and analyzes a mathematical model for the falling film plate-fin condensers/reboilers (FPCR). In the modeling, both the laminar falling film evaporation and condensation processes, incorporating with interference of mass transfer and interfacial shear stress, are considered, and related to a plate-fin heat exchanger (PHX). The liquid film flow and heat transfer characteristics of oxygen and nitrogen fluids in the PHX are analyzed under given conditions by solving the model with a numerical iteration method. The variations of liquid film thicknesses and local heat transfer coefficients of oxygen and nitrogen as well as the total local heat transfer coefficient have been obtained. Furthermore, the effects of the inlet mass flow rate allocation ratio (i.e., the ratio of inlet mass flow rate of oxygen liquid over the base plate to that over the fin surfaces) on the wetted length of the heat transfer surfaces, the heat transfer performance, and the oxygen liquid circulation ratio (i.e., the ratio of the inlet liquid mass flow rate to the generated vapor mass flow rate) are also discussed. A proper inlet mass flow rate allocation ratio of oxygen liquid is presented. The wave effects are further considered and analyzed through the inclusion of a model for the wave factor.

Flow reactor models for fluid—fluid systems, based on the two-film theory

Flow Reactor Models for Gas-Liquid Reactions Based on the Penetration Theory

Axial-dispersion Models of Fluid-Fluid Reactors Based on the Two-Film Theory

Film Flow on Rotating Wheel in a Horizontal Twin-Shaft Reactor for Polymer Devolatilization

A DISPERSION MODEL FOR GAS-LIQUID REACTORS IN COCURRENT FLOW BASED ON THE FILM THEORY

Design-Model Of Gas-Liquid Semibatch Reactors Based On The Film Theory

Unsteady Two-Film Model for Mass Transfer Accompanied by Chemical Reaction

A Study on Flow and Heat Transfer Characteristics for Saturated Falling-Film Evaporation of Liquid Oxygen in a Vertical Channel

Numerical Analysis of Heat Transfer Characteristics of a Falling Film Type Plate-Fin Condenser/Reboiler

A Flow Model for Fluidized-Bed Reactor

Unsteady 2-Film Model For Mass-Transfer

Unsteady two‐film model for mass transfer

Auslegungsmodelle eines Rührkesselreaktors für Gas Flüssig Reaktionen nach der Penetrationstheorie

Mathematical Models for Macro-Scale Mass Transfer in Airlift Loop Reactors

Thin liquid film flow and heat transfer under spray impingement

An axial dispersion model for gas–liquid reactors based on the penetration theory

LOCAL LIQUID SIDE MASS TRANSFER MODEL IN AIRLIFT LOOP REACTOR AND SELF-ASPIRATED REVERSED FLOW JET LOOP REACTOR

Fluid Dynamics of a Novel Reactive Distillation Reactor

A Mass Transfer Model Based on Individual Bubbles and an Unsteady State Film Mechanism

Local gas-liquid mass transfer model in self-aspirated reversed flow jet loop reactor

Local Liquid Side Mass Transfer Model in Gas-Liquid-Solid Three-Phase Flow Airlift Loop Reactor for Newtonian and Non-Newtonian Fluids