Abstract:Dynamic gas–liquid mass transfer behaviors are widely encountered in the chemical, environmental, and engineering fields. Referring to the Singhal full cavitation model, Henry's law, and Zhou's experiments, we innovatively developed a computational model for dissolved and released mass-transfer to revolutionize the independent unidirectional gas-to-liquid or liquid-to-gas theory. From a new perspective, coupled dissolution and evolution mechanisms were defined similar to how condensation and evaporation were redefined, where dissolution and release mass-transfer prediction methods that can be applied to three-dimensional calculations were integrated for the first time. The dissolved gas saturation concentration was the criterion for determining the direction of mass transfer. According to the theoretical derivation, the driving forces behind the dissolution and evolution are the remaining undissolved gas and real-time solution concentration, respectively. We confirmed the validity of the proposed dynamic model using an unsteady simulation after a grid independence study and an experimental verification of dissolved oxygen concentration in plug-discharge flow. The difference in dissolved oxygen concentration between simulations of this computational model and experiments could be low as 2.0%. A higher dissolved oxygen concentration was distributed in the flow separation and throat gas–liquid blocking zones, indicating that a surge in the flow velocity led to an increased mass transfer rate. In addition, a parametric study was conducted to consider the impact of the oxygen volume fraction and initial dissolved oxygen concentration on the real-time concentration.

An axial dispersion model for gas–liquid reactors based on the penetration theory

An Axial Dispersion Model for Evaporating Bubble Column Reactor

Experimental and Numerical Simulation on Sequential Three Phase Jet-Loop Reactor

Axial-dispersion Models of Fluid-Fluid Reactors Based on the Two-Film Theory

Flow Reactor Models for Gas-Liquid Reactions Based on the Penetration Theory

Study on the Numerical Model of Gas-Liquid Dispersion Driven by a Coaxial Mixer

A DISPERSION MODEL FOR GAS-LIQUID REACTORS IN COCURRENT FLOW BASED ON THE FILM THEORY

Auslegungsmodelle eines Rührkesselreaktors für Gas Flüssig Reaktionen nach der Penetrationstheorie

Residence Time Distribution and Modeling of the Liquid Phase in an Impinging Stream Reactor

Dispersionsmodell der dreiphasen-reaktoren mit einer chemischen reaktion beliebiger ordnung

A Stochastic Model for Liquid Dispersion in A Trickle-Bed Reactor

Local gas-liquid mass transfer model in self-aspirated reversed flow jet loop reactor

An Unsteady Heterogeneous Mass Transfer Model for Gas Absorption Enhanced by Dispersed Third Phase Droplets

A Dispersion Model for Fluid Catalytic Cracking Riser and Downer Reactors

Mathematical modeling of the residence time distribution in loop reactors

A general model of radial dispersion with wellbore mixing and skin effects

Computational Model for Predicting the Dynamic Dissolution and Evolution Behaviors of Gases in Liquids

Flow reactor models for fluid—fluid systems, based on the two-film theory

CFD Simulation of the Particle Dispersion Behavior and Mass Transfer–Reaction Kinetics in non-Newton Fluid with High Viscosity

Mathematical Models for Macro-Scale Mass Transfer in Airlift Loop Reactors

A Three-dimensional Heterogeneous Mass Transfer Model for the Absorption of Gas into Multiphase System