Abstract:The problem of high impedance fault (HIF) detection in resonant grounding distribution systems has not been well solved. In practical applications, the existing detection methods either have complex calculation processes and low accuracy or have a weak ability to adapt to complex fault conditions, which limits the adaptability of the existing methods. Based on a theoretical analysis, a novel faulty feeder detection method based on the inner product transformation of extreme values is proposed in this paper. First, to eliminate the interference of high-frequency components, the low-frequency characteristic modes of zero-sequence current of each feeder are extracted by the variational mode decomposition (VMD) algorithm. On this basis, the low-frequency intrinsic mode functions (IMFs) are processed by the first-order difference to obtain the current waveform after the difference. Second, the zero crossing point of the differential current waveform is obtained, and then the extreme value point of the original zero-sequence current is calibrated, including the maximum and minimum. Third, at the extreme value point, the comprehensive inner product values (CIPV) of each feeder are calculated. Then, when the values are positive, it is judged as a bus fault, when the value has at least one negative value, it is judged as a feeder fault, and the feeder with the minimum value is judged as a faulty feeder. A large number of simulations and field tests show that this method has better fault detection accuracy in practical applications and is suitable for strong noise interference and asynchronous sampling.

Novel Method of Detecting Single-phase High-impedance Grounding Fault and Reliabilty Verification

Single-phase-to-ground Fault Detection with Distributed Parameters Analysis in Non-Direct Grounded Systems

Analysis and Detection of High Impedance Grounding Fault in Neutral Point Effectively Grounding Distribution Network

Grounding Failure Detection Based on Wavelets Method in Resonant Grounded Power Distribution System

Novel Non-unit Transient-based Protection of Single Phase High-impedance Fault

Active High-Impedance Fault Detection Method for Resonant Grounding Distribution Networks

High-Resistance Grounding Fault Detection and Line Selection in Resonant Grounding Distribution Network

Single-phase fault detection based on the wavelet packet analysis of zero-sequence power components in the Petersen-coil grounded system

A Novel Fault Location Method for High Impedance Grounding Fault in Distribution Network

Comparison of Single-phase-to-ground Faults in Distribution Network with Two Kinds of Grounding Methods

Identification and Simulation of Single-Phase Grounding Fault in Neutral Point Insulation System

An Intermittent High-Impedance Fault Identification Method Based on Transient Power Direction Detection and Intermittency Detection

Single-Phase Permanent Fault Detection for Reactored EHV/UHV Transmission Lines

High-Impedance Fault Detection Based on Nonlinear Voltage–Current Characteristic Profile Identification

Faulty Feeder Detection Under High Impedance Faults for Resonant Grounding Distribution Systems

High-Impedance Fault Detection Method Based on Stochastic Resonance For a Distribution Network With Strong Background Noise

A faulty line detection method for single phase-to-ground fault in resonant grounding system with CTs reversely connected

A novel detector of ground fault and ferro_resonance in ungrounded distribution system

Fault Handling and Localization Strategy Based on Waveform Characteristics Recognition with Coordination of Peterson Coil and Resistance Grounding Method

Shunt Petersen-Coil with Resistor for Single Phase Fault Detection in Resonant Grounded Power Distribution Systems

Wavelet‐based approach for high impedance fault detection of high voltage transmission line