Abstract:The effect of 0.5at% Ag and its combination with 0.4at% Zn on the precipitation hardening behavior of Mg-1.5Sn-0.5Mn (at%) alloy have been investigated using hardness measurements and transmission electron microscopy (TEM). The results show that sole addition of Ag can remarkably improve the peak hardness from 58HV to 77HV after ageing at 200°C, which is attributed to the increased number density, the size and so the volume fraction of the Mg 2Sn lath precipitates. A combination addition of Ag and Zn further improves the peak-hardness to 83HV and the time to peak hardness has been reduced from 120h to 100h. The joint addition of Ag and Zn both increases the number density and refines the Mg 2Sn precipitates. Zn also promotes the Mg 2Sn precipitates lying on the non-basal plane of matrix, as well as the blocky Mg 54Ag 17 phase which has an orientation relationship with α-Mg matrix as (001) e{open}'//(0001) α, [200] e{open}'//[-1-120] α, [0-20] e{open}'//[1-100] α. In the peak-aged Ag modified alloys, Ag atoms are segregated in the Mg 2Sn precipitates. Nucleation, growth and coarsening of the Mg 2Sn precipitates simultaneously occur as the ageing proceeds. The growth of Mg 2Sn precipitates exhibits a significant anisotropic behavior. Addition of Ag can promote the precipitation process during the underage period and retarding the growth of Mg 2Sn during the overage period, leading to a more thermal stable microstructure of the Ag and Ag+Zn modified alloys, from which only a small hardness decrease after 700h ageing is detected. © 2012 Elsevier B.V.

Enhanced Precipitation-Hardening in Mg–Gd Alloys Containing Ag and Zn

Enhanced age-hardening response and mechanical properties of the Mg-Gd-Y-Zn-Zr alloy by trace Ag addition

Improved age-hardening behavior of Mg-Sn-Mn alloy by addition of Ag and Zn

Effect of Ti Addition on the Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn Alloys

In Situ TEM Investigation of Electron Irradiation and Aging-Induced High-Density Nanoprecipitates in an Mg-10Gd-3Y-1Zn-0.5Zr Alloy

Microstructure and Mechanical Properties of Mg-Xy-1.5mm-0.4zr Alloys

Developing Mg-Gd-Dy-Ag-Zn-Zr Alloy with High Strength via Nano-Precipitation

Influences of Gd on the Microstructure and Strength of Mg–4.5Zn Alloy

Tuning texture and precipitation using Y/Gd atomic ratio in iso-concentration Mg–Y–Gd–Ag–Zr extruded alloys

Enhanced age-hardening response of the Mg-Sm alloy via alloying with Cd

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys

Effect of aging temperature on the hardening behavior and precipitation evolution of Mg 10Gd alloy

Enhanced Age-Hardening Response and Microstructure Study of an Ag-modified Mg–Sn–Zn Based Alloy

The Effect of Gd and Zn Additions on Microstructures and Mechanical Properties of Mg-4sm-3nd-Zr Alloy

Investigations on Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn-Zr-Nd Alloy

Local Atomic Structures of Gd and Zn Atoms in Extruded Mg-Gd-Zn Alloys

Effect of Y on Age Hardening Response and Mechanical Properties of Mg-xY–1.5LPC −0.4zr Alloys

Enhanced age-hardening by synergistic strengthening from Mg Si and Mg Zn precipitates in Al-Mg-Si alloy with Zn addition

Effect of Al addition on microstructure and mechanical properties of Mg−Gd−Zn alloys

Effect of Zn Concentration on the Microstructures and Mechanical Properties of Extruded Mg–7Y–4Gd–0.4Zr Alloys

Effect of Ag addition on the age hardening and precipitation behavior in an Al-Cu-Li-Mg-Zn-Mn-Zr alloy