Abstract:To enhance the strength of traditional 5xxx series alloys, this work designed Al-Mg-Zn alloys with high Mg content and different Zn/Mg ratios (wt%, Zn/Mg ratio<1.0) drawing inspiration from aging precipitation strengthening of 2xxx or 7xxx series aluminum alloys and thermodynamic calculation. Measurement of density, microhardness and tensile property as well as electron backscatter diffraction (EBSD) and high-resolution transmission electron microscopy (HRTEM) were used to investigate the effects of four different Zn/Mg ratios on the aging precipitation behavior and mechanical property of the studied alloys. As Zn/Mg ratio increases, both N3 (Zn/Mg = 0.37) and N4 (Zn/Mg = 0.71) precipitate fine and dispersed distributed nano T-Mg-32(Al,Zn)(49) precipitates. After a two-step aging treatment process of 90 degree celsius/24 h + 140 degree celsius/8 h, N4 exhibits tensile strength of 595.5 MPa, yield strength of 484 MPa, and elongation of 10.2% in the peak state. N4 features higher specific strength and lower density compared to the popular 7075-T6. The TEM analysis reveals that the addition of trace Sc and Zr leads to the formation of Al-3(Sc,Zr) precipitates, which significantly refines grain size thus enhancing strength. The primary strengthening mechanisms of Al-Mg-Zn-Sc-Zr alloy include grain boundary strengthening, solid solution strengthening, and precipitation strengthening. A yield strength model considering multiple strengthening mechanisms and thermodynamic calculation has been adopted to achieve accurate yield strength predictions. This work provides reference for composition design, microstructure and property regulation of lightweight high-strength aluminum alloys.

Enhanced age-hardening by synergistic strengthening from Mg Si and Mg Zn precipitates in Al-Mg-Si alloy with Zn addition

Microstructure and Mechanical Properties of Mg-Xy-1.5mm-0.4zr Alloys

Enhanced aging precipitation behavior and mechanical properties of 6022 Al–Mg–Si alloy with Zr addition

Effect of Zn Concentration on the Microstructure and Mechanical Properties of Al-Mg-Si-Zn Alloys Processed by Gravity Die Casting

Effects of Zn Addition on the Aging Behavior and Mechanical Properties of Mg-8Al-2Sn Wrought Alloy

Enhanced Age-Hardening Response and Microstructure Study of an Ag-modified Mg–Sn–Zn Based Alloy

Improved age-hardening behavior of Mg-Sn-Mn alloy by addition of Ag and Zn

Effects of Zn Additions on the Microstructure and Hardness of Mg–9Al–6Sn Alloy

Enhanced Age-Hardening Response of Mg–Zn Alloys Via Co Additions

Effect of Ge and Mg Additions on the Aging Response Behavior and Mechanical Properties of Al-Si-Cu Alloy

Enhanced age-hardening response of the Mg-Sm alloy via alloying with Cd

Synergy of homogeneous/heterogeneous nucleation in Al-Mg-xSi-Cu-Zn alloys with rapid age-hardening response

Enhanced Precipitation Hardening in Mg-Zn-Al Casting Alloys

Effect of Zn/Mg Ratio on Aging Precipitates and Mechanical Property of High Mg Content Al-Mg-Zn Alloys with Sc and Zr Additions

Double-peak Age Strengthening of an Al-Mg-Si-Zn Alloy Processed by Laser Powder Bed Fusion

Influence of Minor Zn Addition on Precipitation Behavior and Intergranular Corrosion Properties of Al-Mg-Si Alloy

Effects of Al/Zn Ratio on the Microstructure and Strengthening of Mg-Al-Zn Alloys

Enhanced age-hardening of an Al-5Mg-2Zn-1Cu alloy by pre-aging combined with pre-straining

Effects of Mg/Zn ratio and pre-aging on microstructure and mechanical properties of Al–Mg–Zn–Cu alloys

Microstructure and mechanical properties of as aged Mg–3Sn–1Al and Mg–3Sn–2Zn–1Al alloy

Study on Microstructural Evolution and GP Zone Strengthening Mechanism by Solution and Aging Treatment in Non-dendritic Mg-6Zn-5Al Magnesium Alloy