A Nanoporous Polymeric Sorbent for Deep Removal of H2S from Gas Mixtures for Hydrogen Purification

Xiaoxing Wang,Xhaoliang Ma,Lu Sun,Chunshan Song

DOI: https://doi.org/10.1039/b614621j

IF: 9.8

2007-01-01

Green Chemistry

Abstract:A nanoporous composite sorbent (PEI/SBA- 15) was developed by the wet impregnation loading of a linear polyethyleneimine (PEI) on a mesoporous molecular sieve SBA-15, which was prepared by hydrothermal synthesis. The sorbent was characterized by XRD at low angles, N-2 physisorption, scanning electron microscopy (SEM) and FT-IR. The sorption performance of the sorbent for removing H2S front H-2-contairung gas mixtures was evaluated in a flow system. The characterization results showed that after PEI loading, PEI was dispersed inside the mesochannels of SBA-15 with almost no change of the SBA-15 structure, and the interaction of amine groups in PEI with the functional groups on the SBA-15 surface may anchor PEI on the inner surface of SBA-15. The effects of the inlet H2S concentration and co-existing moisture oil the sorption performance were examined. With increasing inlet H2S concentration, both the breakthrough capacity and the saturation capacity increased. The sorption of H2S oil the PEI/SBA- 15 sorbent can be expressed by the Langmuir adsorption isotherm. A higher sorption capacity was observed in :he presence of moisture, indicating that moisture has a promoting effect on the sorption removal of H2S from gas streams on the PEI/SBA-15 sorbent. However, the desorption rate of the sorbed HS was also reduced in the presence of moisture. The sorption/ desorption cycles showed that the PEI/SBA- 15 sorbent had a good regenerability and stable sorption performance.