Abstract:The capture and storage of toxic industrial chemicals such as H2S using porous polymer networks (PPNs) has shown promising application because of their high porosity, high surface area, high stability, low-cost and lightweight. In this work, 17,846 PPNs with the diamond-like topology were computationally screened to identify the optimal adsorbents for the removal of H2S and CO2 from humid natural gas based on the combination of molecular simulation and machine learning algorithms. The top-performing PPNs such as hPAFs-0201 with the highest adsorption performance scores (APS) were evaluated and identified based on their adsorption capacities and selectivity for H2S and CO2. The strong affinity between water molecules and the framework atoms in a few PPNs has a significant impact on the adsorption selectivity of acid gases. Based on decision tree analysis, we found two main design paths of the optimal PPNs for natural gas sweetening, which are the PPNs with LCD <= 4.648 angstrom, V-f <= 0.035, and PLD <= 3.889 angstrom, and those with 4.648 angstrom <= LCD <= 5.959 angstrom, rho <= 837 kg m(-3). In addition, we constructed different machine learning models, particularly artificial neural network, available to accurately predict the APS of PPNs. 2D projection map of geometrical properties of PPNs using the t-distributed stochastic neighbor embedding (t-SNE) method shows that the screened 390 samples exhibit the similar structures. Among the top-23 PPNs with the highest APS, hPAFs-0201 has enhanced natural gas sweetening performance due to its strong affinity between the N-rich organic linkers and acid gases. hPAFs-0752 shows the highest isosteric adsorption heat of H2S and CO2 (Q degrees(st) = 49.84 kJ mol(-1)), resulting in its second-highest APS as well as high hydrophilicity. Based on the combination of molecular simulation and machine learning, comprehensive insights into the high-throughput screening of PPNs in this work will provide new ideas for the design of high-performance PPNs for gas separation.

Aminated polyacrylonitrile fibers for the removal of hydrogen sulfide from natural gas at room temperature

Humidity Swing Adsorption of H2S by Fibrous Polymeric Ionic Liquids (Pils)

Adsorption Mechanism and Regeneration Performance of Calcined Zeolites for Hydrogen Sulfide and Its Application

High‐throughput Computational Screening of Porous Polymer Networks for Natural Gas Sweetening Based on a Neural Network

Anchoring Cu-N Active Sites on Functionalized Polyacrylonitrile Fibers for Highly Selective H2S/CO2 Separation.

Performance Evaluation of Zn-Fe Adsorbent for H 2 S Adsorption During Biogas Purification

Highly Efficient Nonaqueous Phase Change Absorbent for H<sub>2</sub>S Absorption with Low Energy Consumption

A Nanoporous Polymeric Sorbent for Deep Removal of H2S from Gas Mixtures for Hydrogen Purification

Experimental Study on the Treatment of Odor Gas Containing Hydrogen Sulfide by Immobilized Microorganisms

Selective Removal of H2S from Biogas Using Solid Amine-Based “molecular Basket” Sorbent

Removal of Hydrogen Sulfide by Metal-Free Amine-Functionalized Mesoporous Carbon at Room Temperature: Effect of Amines

Functionalization of Activated Carbon Fiber Mat with Bimetallic Active Sites for NH3 and H2S Adsorption at Room Temperature

Turning Fulvic Acid into Silver Loaded Carbon Nanosheet As a Regenerable Sorbent for Complete Hg0 Removal in H2S Containing Natural Gas

Development of low-cost adsorbents derived from sludge of groundwater treatment for gaseous hydrogen sulfide removal

Removing hydrogen sulfide with activated carbon fibers modified ferric salts at ambient temperature

Hydrogen Sulfide Adsorption from Natural Gas Using Silver-Modified 13X Molecular Sieve

Low-temperature H2S Removal from Gas Streams with SBA-15 Supported ZnO Nanoparticles

A regenerable oxide-based H2S adsorbent with nanofibrous morphology

Ultrafine Au nanoparticles confined in three-dimensional mesopores of MCM-48 for efficient and regenerable Hg0 removal sorbent in H2S and H2O containing natural gas

Hydrophobic Protic Ionic Liquids Tethered with Tertiary Amine Group for Highly Efficient and Selective Absorption of H2S from CO2

Implantation of Guanidine Chemical Adsorption Sites in Hyper-Crosslinked Polymers for Effective Adsorption and Conversion of H2S