Abstract:Herein, a new phase change absorbent N‐aminoethylpiperazine/diethylene glycol dimethyl ether/H2O is developed to absorb carbon dioxide in flue gas. Through a series of experimental operations, the optimal absorption and desorption conditions are found, and the mechanism and renewable energy consumption are studied to determine whether it is suitable for industrial applications. Excessive carbon dioxide (CO2) emissions can lead to environmental problems, and the use of phase change absorbents for CO2 capture has received much attention due to their excellent absorption and desorption properties. Herein, a novel liquid–liquid phase change absorbent consisting of N‐aminoethylpiperazine (AEP), diethylene glycol dimethyl ether (DEGDME), and H2O is utilized. Under the optimal absorption conditions, the absorption capacity is 1.23 mol CO2·mol−1 amine. The rich‐phase viscosity of the AEP/DEGDME/H2O solution is only 6.2 mPa s−1, and the rich phase‐to‐volume ratio is 52.7%, which is suitable for industrial applications. After five cycles of absorption–desorption experiments, the cyclic capacity reaches 0.62 mol CO2·mol−1 amine. However, it should be noted that this leads to an increase in the viscosity of the solution with time. The 13C Nuclear Magnetic Resonance characterization is used to analyze the material distribution and phase separation mechanism, and it is found that during the absorption process, the carbamate and carbonate products generated by the reaction of the amino group in the AEP with CO2 are mainly located in the rich phase, while the DEGDME and H2O mainly remain in the lean phase. In the desorption process, most of the absorbed products are decomposed, and the regeneration efficiency is 66.8%. Through the regeneration energy consumption experiment, when the regeneration efficiency is 56%–67%, the total regeneration energy consumption is 2.71–2.89 GJ t−1 CO2, which is 0.91–1.09 GJ t−1 CO2 lower than that of the regeneration efficiency of 30 wt% MEA solution at 63%, which indicates that this absorbent has certain energy‐saving advantages.

Highly Efficient Nonaqueous Phase Change Absorbent for H<sub>2</sub>S Absorption with Low Energy Consumption

Humidity Swing Adsorption of H2S by Fibrous Polymeric Ionic Liquids (Pils)

Liquid-liquid phase-change absorption of hydrogen sulfide by superbase 1,8-diazabicyclo[5.4.0]undec-7-ene and its chemical regeneration

Hydrophobic Protic Ionic Liquids Tethered with Tertiary Amine Group for Highly Efficient and Selective Absorption of H2S from CO2

Aminated polyacrylonitrile fibers for the removal of hydrogen sulfide from natural gas at room temperature

Double H-bonds Multimer Absorbent Design for H2S Absorption

Selective Removal of H2S from Biogas Using Solid Amine-Based “molecular Basket” Sorbent

A Nanoporous Polymeric Sorbent for Deep Removal of H2S from Gas Mixtures for Hydrogen Purification

Deep Removal of Ultra-Dilute H2S for H2 Purification Using CuCo Layered Double Hydroxide Adsorbent

Highly efficient and selective H<sub>2</sub>S capture by task-specific deep eutectic solvents through chemical dual-site absorption

Low Viscosity Superbase Protic Ionic Liquids for the Highly Efficient Simultaneous Removal of H2S and CO2 from CH4

Liquid-solid Phase-Change Absorption of Acidic Gas by Polyamine in Nonaqueous Organic Solvent

A Novel Phase Change Absorbent for CO2 Capture with Low Viscosity and Effective Absorption–Desorption Properties

Ultrafine Au nanoparticles confined in three-dimensional mesopores of MCM-48 for efficient and regenerable Hg0 removal sorbent in H2S and H2O containing natural gas

Energy-efficient biphasic solvents for industrial CO2 capture: Absorption mechanism and stability characteristics

A Novel ILs Biphasic Absorbent with Low Regeneration Energy Consumption for CO2 Capture: Screening of Phase Separation Regulators and Mechanism Study

Task-specific deep eutectic solvents for the highly efficient and selective separation of H<sub>2</sub>S

Reactive Regeneration in Novel Hybrid Solvent: Achieving Dual Objectives of H2S Conversion and Absorbent Regeneration

Efficient absorption of H 2 S and in situ conversion of α,β-unsaturated carboxylate esters by bi-quaternary ammonium ionic liquids

Energy-efficient non-aqueous biphasic solvent for carbon capture: Absorption mechanism, phase evolution process, and non-corrosiveness

Rational Formulation Design and Commercial Application of A New Hybrid Solvent for Selectively Removing H2s and Organosulfurs from Sour Natural Gas