Abstract:The H2O and H2S in natural gas are frequently deemed to have inhibitory influences on Hg0 removal performance of most noble metal based Hg0 absorbents, it is extremely significant to develop an efficient and regenerable Hg0 removal absorbent with excellent H2S and H2O tolerance. In the work, the Au/MCM-48 absorbent was controllable synthesized using a facile yet robust method for Hg0 removal in H2S and H2O containing natural gas. The ultrafine Au nanoparticles with a diameter of 1.4 nm were embedded and uniformly dispersed in the three-dimensional channels of MCM-48. The absorbent of 1 wt% Au achieved a complete Hg0 capture performance at 60,000 h−1 and 30 °C by forming Au-Hg amalgam, and its Hg0 adsorption capacity achieved to 7.23 mg∙g−1 at 5% breakthrough. The spent sample could be easily regenerated by thermal treatment without distinct degradation over 5 cycles. The introduction of H2S and H2O in gas flow had an inappreciable impact on Hg0 removal performance over the Au/MCM-48 absorbent. The excellent Hg0 adsorption efficiency, outstanding capture capacity and good regeneration performance of the absorbent due to the nano-confinement of MCM-48 channels, which prevents Au nanoparticles from growing and agglomerating. Excellent H2O tolerance is attributed to the good hydrophobicity of MCM-48 modified by trimethylchlorosilane, and the high H2S tolerance is due to the fact that the Au nanoparticles lack reactivity toward H2S. This work provides a promising method for the preparation of effective and regenerable absorbents for demercuration in H2S and H2O containing natural gas.

Double H-bonds Multimer Absorbent Design for H2S Absorption

Humidity Swing Adsorption of H2S by Fibrous Polymeric Ionic Liquids (Pils)

A composite of borohydride and super absorbent polymer for hydrogen generation

Liquid-liquid phase-change absorption of hydrogen sulfide by superbase 1,8-diazabicyclo[5.4.0]undec-7-ene and its chemical regeneration

H2S Absorption with Deep Eutectic Solvents: Low Partial Pressure Capture and Thermodynamic Analysis

Highly efficient and selective H<sub>2</sub>S capture by task-specific deep eutectic solvents through chemical dual-site absorption

Implantation of Guanidine Chemical Adsorption Sites in Hyper-Crosslinked Polymers for Effective Adsorption and Conversion of H2S

Amino- and Thiol- Polysilsesquioxane Simultaneously Coating on Poly(p-Phenylenetherephthal Amide) Fibers: Bifunctional Adsorbents for Hg(II)

Engineering Highly Reversible Hydrogen Bonding Interaction in Pebax/deep Eutectic Solvent Blended Membranes for Efficient Separation of H2S from CO2 and CH4

Efficient Hg Vapor Capture with Polysulfide Intercalated Layered Double Hydroxides

Task-specific deep eutectic solvents for the highly efficient and selective separation of H<sub>2</sub>S

Fabrication and performance of MEA/DEA/TEA modified UiO-66 material for removing low concentration hydrogen sulfide at normal temperature environment

Development of CuO/Cu4(OH)6SO4 Nanoparticle Mixtures to Optimize the H2S Adsorption

Selective H2S/CO2 Separation by Metal–Organic Frameworks Based on Chemical-Physical Adsorption

Aminated polyacrylonitrile fibers for the removal of hydrogen sulfide from natural gas at room temperature

Hydrophobic Protic Ionic Liquids Tethered with Tertiary Amine Group for Highly Efficient and Selective Absorption of H2S from CO2

Ultrafine Au nanoparticles confined in three-dimensional mesopores of MCM-48 for efficient and regenerable Hg0 removal sorbent in H2S and H2O containing natural gas

Sb-Fe bimetallic non-aqueous phase desulfurizer for efficient absorption of hydrogen sulfide: A combined experimental and DFT study

Selective Removal of H2S over CO2 in a Membrane Gas–liquid Microdisperison Microreactor

Aminosiloxane having double absorption sites with low viscosity for efficient SO 2 capture

Low Viscous Protic Ionic Liquids Functionalized with Multiple Lewis Base for Highly Efficient Capture of H2S