Abstract:Introduction: Recently, great efforts have been dedicated to tailoring the microstructure of the RHEA films to further optimize the performance of the films. However, there is still a lack of in-depth study on their wear mechanism and microstructure evolution. Methods: In this work, the novel ZrNbTiMo RHEA films were prepared by DC magnetron sputtering and splicing target techniques. The effects of sputtering power on the microstructure, hardness, toughness, and wear resistance of ZrNbTiMo RHEA films were investigated in detail. Results: The ZrNbTiMo films possess the nanocomposite structure, the bcc nanocrystal is wrapped in an amorphous phase. The wear resistance of the film is expected to be improved by finding an appropriate ratio between the amorphous phase and the nanocrystal phase. The nanocrystal structure ensures the high hardness (6.547 ∼ 7.560 GPa) of the ZrNbTiMo film. In addition, the nanocrystals hinder crack propagation, this toughness mechanism effectively improves the toughness of the film. The ZrNbTiMo film prepared at 150 W possesses excellent mechanical properties, hardness of 7.240 GPa and toughness of 0.437 ± 0.040 MPa × m 1/2 , exhibits better wear resistance (wear rate: 5.223 × 10 −7 mm 3 /N m). Discussion: The wear resistance of ZrNbTiMo film is controlled by both hardness and toughness. The nanocomposite structure makes the ZrNbTiMo films possess a composite fracture which could improve the toughness of the ZrNbTiMo film. The wear-resistant ZrNbTiMo RHEA films with wear rates of the order of 10 −6 mm 3 /N m have been prepared by tuning the sputtering power, this film can be used as a potential candidate for wear-resistant coatings.

Improvement in Power Durability of Al Electrode Films Used in SAW Devices by Zr Additive and Ti Underlayer

Improved Electromigration Reliability of Surface Acoustic Wave Devices Using Ti/Al-Mo/Ti/Al-Mo Electrodes

The Effects of Zr Underlayer on the Microstructure and Properties of Al Films

Microstructure and Electronic Properties of Al/Zr/Linbo3 Multilayers

Significant Enhancement in Electromigration Resistance and Texture of Aluminum Films Using an Ultrathin Titanium Underlayer

Enhanced Power Durability of Surface Acoustic Wave Filter with Al/Ti/Cu/Ti Electrodes

Texture-enhanced Al-Cu Electrodes on Ultrathin Ti Buffer Layers for High-Power Durable 2.6 GHz SAW Filters

AFM Study on the Surface Morphologies of TiN Films Prepared by Magnetron Sputtering and Al2O3 Films Prepared by Atomic Layer Deposition

Improved Resistance to Electromigration and Acoustomigration of Al Interdigital Transducers by Ni Underlayer

Ion bombardment-induced high orientation of Al/Ti films for surface acoustic wave device applications

Improvement of electrochemical cyclic durability of Zr-based AB2 alloy electrodes

Growth of Al-Cu Thin Films on LiNbO3 Substrates for Surface Acoustic Wave Devices Based on Combinatorial Radio Frequency Magnetron Sputtering

The effect of partial substitution of Ti with Zr, Cr or V in the Mg35Ti10Ni55 electrode alloy on its electrochemical performance

Improved wear and corrosion resistance of biological compatible TiZrNb films on biomedical Ti6Al4V substrates by optimizing sputtering power

Comparison of Sputtering and Atomic Layer Deposition Based Ultra-Thin Alumina Protective Layers for High Temperature Surface Acoustic Wave Devices

Design of amorphous-nanocrystalline films of TiAlCrNbZr x multi-component alloy: The effect of Zr on the corrosion resistance and mechanical properties

Enhancement of the orientation and adhesion of Al films on LiNbO3 with Ni underlayer

A study of the stress and resistivity of Al/Ti films deposited by an ion beam assisted process for surface acoustic wave devices applications

Power Durability Enhancement and Failure Analysis of TC-SAW Filter with Ti/Cu/Ti/Cu/Ti Electrodes

Tuning microstructure and mechanical and wear resistance of ZrNbTiMo refractory high-entropy alloy films via sputtering power

Structure and fracture toughness of TiAlN thin films deposited by deep oscillation magnetron sputtering