Abstract:The cavitation damage in the Engine cooling water pump (ECWP) is the key factor that shortens the lifespan of automobile cooling systems, and causes vibration and noise. To improve cavitation performance and external characteristics of ECWP, three optimized models were designed on the basis of WP7 diesel ECWP. The whole flow fields in three models and the prototype pump were numerically simulated, employing the time averaged Navier-Stokes equation, the standard k-ε turbulent model and Zwart-Gerber-Belamri multiphase flow model by ANSYS-CFX software. Pressure distribution, turbulent kinetic energy distribution, bubble volume fraction distribution, external characteristics and cavitation performance of the prototype pump and optimized models were compared and analyzed. The results show that the external characteristics and cavitation performance of the optimized models are significantly better than that in the prototype pump. Through decreasing the inlet blade angle and wrap angle, extending the blade to inlets and extending a certain inclination in the blade, shock loss in blade inlet was reduced and so, the performance of pump will be improved. The flow condition at blade inlet will also be improved greatly, which in turn improves cavitation performance. When reducing the quantity of blades, the excretion coefficient will drop, flow area of blade inlet becomes bigger, but head has a little drop. And the pump optimized by reducing the quantity of blades has the optimal cavitation performance among three optimized models. With the decrease of impeller diameter, the absolute pressure in the critical cavitation point becomes bigger, the inlet bubble volume fraction at the same absolute pressure increases while cavitation performance gets worse. The obtained numerical results were compared with the experimental ones, and the outcome showed the same tendency between the two along with acceptable error.

Optimization for Cooling System on CFD Four-Cylinder Machine Vegetable Oil

CFD Calculation and Analysis of Cooling Jacket Flow and Heat Transfer for Car Engine

Study of Different Cooling Structures on the Thermal Status of an Internal Combustion Engine

Multi-objective Optimization of Transpiration Cooling for High Pressure Turbine Vane

CFD Three-Dimensional Numerical Calculation on Flow and Heat Transfer of Cooling-Water in Engine Cylinder Cooling Jacket

Simulation, Experimentation, and Collaborative Analysis of Adjacent Heat Exchange Modules in a Vehicular Cooling System

Numerical Simulation for Flow and Heat Transfer of Engine Coolant

A Study on CFD Optimization Analysis of Water Jacket for a Gasoline Engine

Optimization Design of Heat Transfer Performance for Diesel Cooling Water Jacket

An Economical and Precise Cooling Model and Its Application in a Single-Cylinder Diesel Engine

Research on the Optimization of a Diesel Engine Intercooler Structure Based on Numerical Simulation

Study on Diesel Engine Coolant Temperature Control Strategy with Feedforward

Numerical study of flow and heat transfer on construction machinery detached vehicular cooling system

Three-dimensional Numerical Calculation on Flow and Heat Transfer of Cooling-Water in Engine Cylinder Head Jacket by CFD Software STAR-CD

Numerical calculation and optimization designs in engine cooling water pump

Experiment and Simulation Research for Vehicle Engine Cooling Package

Optimization of Diesel Chamber by Advanced Combustion Simulation

Optimization of Gasoline Engine Intake System Based on 1D, 3D and Coupled Simulations

Hydraulic performance prediction and optimization of an engine cooling water pump using computational fluid dynamic analysis

Optimization design and analysis of cooling system used for mini electric vehicle motor

A Simulation Research on the Noise and Flow of Vehicle Cooling Fans