Abstract:International Journal of Aeroacoustics, Ahead of Print. The investigation into aerodynamic noise arising from rotating surfaces bears significant practical implications. Among these, engine cooling fans have persistently been identified as primary contributors to vehicle noise. This study aims to provide a deeper comprehension of the complex unsteady flow dynamics surrounding an automotive cooling fan and its consequential impact on the generation of aerodynamic noise. Prediction of sound generated from fluid flow, despite its difficulty, can be simulated using modern numerical techniques and computational fluid dynamics (CFD). This research undertakes both numerical and experimental investigations. The experiment involves evaluating fan pressure against mass flow rate at 1500 rpm, while aerodynamic noise assessment transpires at two rotational speeds of 1500 rpm and 2500 rpm. Empirical sound pressure level data of the fan is meticulously captured using the requisite measurement apparatus. In addition, numerical investigations of the aerodynamic noise of an automotive cooling fan based on computational fluid dynamics and computational aeroacoustic (CAA) method have been performed. Initially, a steady-state aerodynamic simulation is carried out, followed by the simulation of the flow field through the application of the improved delayed detached eddy simulation (IDDES) formulation. The pressure rise of the fan versus the mass flow rate is obtained. The satisfactory concurrence observed between the simulation outcomes derived from the numerical method and the experimental dataset stands as notable validation. For the aeroacoustic computation, the Ffowcs Williams-Hawkings model is invoked to deduce sound pressure levels at specific flow points. The broadband noise sources model is also used to obtain the sound power level on the blade surface. Conclusively, it emerges that maximal noise manifestation occurs at a 90° degree angle, corresponding to the hub's frontal orientation, with discernible dominance of tonal noise within lower frequency ranges (sub-1000 Hz).

A Simulation Research on the Noise and Flow of Vehicle Cooling Fans

CFD Calculation and Analysis of Cooling Jacket Flow and Heat Transfer for Car Engine

Numerical Simulation and Structure Optimization of Compressor Muffler

Optimization Design of Centrifugal Fan Impeller Based on Numerical Simulation.

Optimization Based on Computer Fluid Dynamics Finite Element Method Automotive Cooling Fan Structure

Cooling Module Fan Noise Simulation

Experiment and simulation research of engine cooling fan in dump truck

Numerical and experimental investigation of aerodynamic noise from a cooling fan in a turbulent flow

Simulation and Experimental Study on Thermal State of Engine Compartment of Commercial Vehicle

Numerical study of flow and heat transfer on construction machinery detached vehicular cooling system

Prediction and optimization of aerodynamic noise in an automotive air conditioning centrifugal fan

Noise reduction optimization for numerous radiator fans for fuel cell vehicle considering thermal-fluid-acoustic synergy

Experiments on match optimization of underhood cooling module

Numerical Investigation of Unsteady Flow and Aerodynamic Noise Characteristics of an Automotive Axial Cooling Fan

Research on aerodynamic performance and noise reduction of high-voltage fans on fuel cell vehicles

Optimization Design for Aerodynamic Noise Reduction of Train Air-Conditioning Axial Fan

Numerical simulation and test validation for performance of a muffler in an exhaust pipe

Numerical Investigation on the Aerodynamic and Aeroacoustic Characteristics in New Energy Vehicle Cooling Fan with Shroud

Feasibility verification of reducing the total sound pressure level of multiple cooling fans for fuel cell vehicle

Optimizing Cooling Fan Power Consumption for Improving Diesel Engine Fuel Efficiency Using CFD Technique

AErodynamic Noise Characteristics Of Axial Flow Fan In Narrow Space And Noise Reduction Based On Flow Control