Abstract:The cavitation damage in the Engine cooling water pump (ECWP) is the key factor that shortens the lifespan of automobile cooling systems, and causes vibration and noise. To improve cavitation performance and external characteristics of ECWP, three optimized models were designed on the basis of WP7 diesel ECWP. The whole flow fields in three models and the prototype pump were numerically simulated, employing the time averaged Navier-Stokes equation, the standard k-ε turbulent model and Zwart-Gerber-Belamri multiphase flow model by ANSYS-CFX software. Pressure distribution, turbulent kinetic energy distribution, bubble volume fraction distribution, external characteristics and cavitation performance of the prototype pump and optimized models were compared and analyzed. The results show that the external characteristics and cavitation performance of the optimized models are significantly better than that in the prototype pump. Through decreasing the inlet blade angle and wrap angle, extending the blade to inlets and extending a certain inclination in the blade, shock loss in blade inlet was reduced and so, the performance of pump will be improved. The flow condition at blade inlet will also be improved greatly, which in turn improves cavitation performance. When reducing the quantity of blades, the excretion coefficient will drop, flow area of blade inlet becomes bigger, but head has a little drop. And the pump optimized by reducing the quantity of blades has the optimal cavitation performance among three optimized models. With the decrease of impeller diameter, the absolute pressure in the critical cavitation point becomes bigger, the inlet bubble volume fraction at the same absolute pressure increases while cavitation performance gets worse. The obtained numerical results were compared with the experimental ones, and the outcome showed the same tendency between the two along with acceptable error.

A Study on CFD Optimization Analysis of Water Jacket for a Gasoline Engine

CFD Calculation and Analysis of Cooling Jacket Flow and Heat Transfer for Car Engine

Optimization Design of Heat Transfer Performance for Diesel Cooling Water Jacket

CFD Three-Dimensional Numerical Calculation on Flow and Heat Transfer of Cooling-Water in Engine Cylinder Cooling Jacket

Three-dimensional Numerical Calculation on Flow and Heat Transfer of Cooling-Water in Engine Cylinder Head Jacket by CFD Software STAR-CD

Three-Dimensional Computational Fluid Dynamics Modeling of a 6V150 Diesel Engine

An Intelligent CFD-Based Optimization System for Fluid Machinery: Automotive Electronic Pump Case Application

Analysis and Optimisation of Thermo-Mechanical Coupling Load of Cylinder Head Considering Fluid-Structure Interaction for a Marine High-Power Diesel Engine

AN OPTIMIZATION STUDY ON CAVITATION FLOW IN A STEAM TRAP VALVE

The Research on High-Speed Gas Jet of Rocket Nozzle Underwater

Computational Fluid Dynamic Modelling a Heavy-Duty Compression-Ignition Engine Fuelled with Diesel and Gasoline-Like Fuels

Design Method of Water Jet Pump Towards High Cavitation Performances

Optimization of Gasoline Engine Intake System Based on 1D, 3D and Coupled Simulations

Hydraulic performance prediction and optimization of an engine cooling water pump using computational fluid dynamic analysis

Numerical calculation and optimization designs in engine cooling water pump

Optimization of exhaust ejector system for marine gas turbine enclosure cooling: Computational fluid dynamics analysis and parameter optimization

CFD investigation of flow hydrodynamics and optimization in an industrial‐scale annular lance with swirl flow

Research on the Optimization of a Diesel Engine Intercooler Structure Based on Numerical Simulation

Two Phase Flow Simulation for Nucleate Boiling Heat Transfer Calculation in Waterjacket of Diesel Engine

Design Optimization with Computational Fluid Dynamic Analysis of Β-Type Stirling Engine

Experimental investigation on the heat transfer enhancement of wall modification inside a piston cooling gallery