Abstract:Carbon fiber paper (CFP) is one of the most widely used gas diffusion layer materials for proton exchange membrane fuel cells (PEMFC) due to its excellent properties such as high conductivity, high strength, high air permeability and corrosion resistance. In this study, CFP was prepared using the phenolic resin (PF) in-pulp addition method. The effect of PF content on the properties of hot-pressed paper (HPP) and CFP was investigated. The results showed that when the dosage of polyethylene oxide (PEO) was 1.5 wt%, the flocculation effect of PEO on PF was basically complete, and the water filterability and retention of carbon fiber pulp were relatively optimal. After HPP was carbonized into CFP, the hydrophobicity, average pore size, porosity, and air permeability increased, while the resistivity and tensile strength decreased. With the increase of PF content, the tensile strength of CFP gradually increased, while the average pore size, porosity, air permeability and resistivity decreased. When the PF content was 250 wt%, the average pore size of CFP was 36.5 μm, the water contact angle was 127°, the porosity was 69.7%, the air permeability was 7.81 × 10 3 mL mm/(cm 2 ·h·mmHg), the resistivity was 21.1 mΩ cm, and the tensile strength was 15.7 MPa. In addition, the CFP prepared using PF in-pulp addition method had a relativity uniform pore size distribution and high air permeability. Therefore, this work shows that the CFP prepared using this technique exhibits excellent comprehensive performance, and enables the manufacturing of CFP to be more efficient, low-cost, and environmentally friendly.

Treatment and characterization of gas diffusion layers by sucrose carbonization for PEMFC applications

Study on micro-porous layer by coating on carbon fiber paper as gas diffusion layer

Interfacial Modiﬁcation and Dispersion of Short Carbon Fiber and the Properties of Composite Papers As Gas Diffusion Layer for Proton Exchange Membrane Fuel Cell (PEMFC)

Preparation of Gas Diffusion Carbon Paper and Its Uniformity Analysis

Study on modification of carbon fiber and performance of carbon paper as gas diffusion layer

Collective Enhancement in Hydrophobicity and Electrical Conductivity of Gas Diffusion Layer and the Electrochemical Performance of PEMFCs

Surface Roughness Dominated Wettability of Carbon Fiber in Gas Diffusion Layer Materials Revealed by Molecular Dynamics Simulations

Influence of carbon paper on self humidifying performance of PEMFC

Enhancing water transport performance of gas diffusion layers through coupling manipulation of pore structure and hydrophobicity

The influence of anode gas diffusion layer on the performance of low-temperature DMFC

Efficient preparation and characterization of carbon fiber paper using phenolic resin in-pulp addition method

Comprehensive Analysis of Wettability in Waterproofed Gas Diffusion Layers for Polymer Electrolyte Fuel Cells

Poly(1,5-diaminoanthraquinone)-Modified Gas Diffusion Backing by Electrochemical Deposition

Superhydrophobic Carbon Functionalized by Chemical Grafting of Fluoroalkylsilane Enables an Efficient Microporous Layer for Proton-Exchange Membrane Fuel Cells

Hydrophobicity enhancement of gas diffusion layer induced by hydrothermal deposition process and the electrochemical performance of proton exchange membrane fuel cell

Silane-functionalized Carbon with Super-Hydrophobicity Advancing Microporous Layer for Proton Exchange Membrane Fuel Cells

Effects of fluorinated ethylene propylene contents in a novel gas diffusion layer on cell performance of a proton exchange membrane fuel cell

INFLUENCE OF ASSYMMETRIC GAS DIFFUSION ELECTRODE ON PERFORMANCE OF AIR-COOLED SELF-HUMIDIFYING PROTON EXCHANE MEMBRANE FUEL CELL

A design of gas diffusion media for polymer electrolyte membrane fuel cell: Characterization and water management investigation

Influence of cathode gas diffusion media on the performance of the PEMFCs

Single-walled carbon nanotube interlayer modified gas diffusion layers to boost the cell performance of self-humidifying proton exchange membrane fuel cells