Abstract:The ultra-high strength of multiphase (MP) alloys for fastener applications is endowed by cold deformation, which induces deformation twinning or phase transformation in the materials. In the present work, MP159 alloy as well as NiCoCr medium-entropy alloy are investigated to assess the effectiveness of a torsional pre-straining as well as surface mechanical grinding treatments to further improve their strength. For the pre-torsion route, microstructural analysis shows that with the activation of different twinning systems and stacking faults, the sequential torsionTorsion and tension tests lead to the observed hierarchical microstructure, which gives rise to the significant increase in the yield strength in the investigated alloys while retaining a good ductility. Further studies reveal that aging treatment of the pre-torsion bars provides additional strengtheningStrengthening to MP159 alloys, with the synergistic strengtheningStrengthening of nanotwinsNanotwins and nanoprecipitates. After the surface mechanical grinding treatment of NiCoCr alloys, a nanocrystalline structure is formed in a region extending about 150 μm from the edge. Considering the high applied strains, a high density of deformation twins is expected in the nanocrystalline region. Micropillar compression of single crystal and nanocrystalline NiCoCr alloy shows that with the refinement of grain size from 200 μm to 40 nm, the yield strength could increase from 900 to 2500 MPa. This reveals that the refinement of grain sizes can significantly increase the yield strength of NiCoCr alloys with a low stacking fault energy.

Dual-phase Nanocrystalline Ni–Co Alloy with High Strength and Enhanced Ductility

High Strength and High Ductility of Electrodeposited Nanocrystalline Ni with A Broad Grain Size Distribution

High Strength Nanocrystalline Ni-Co Alloy with Enhanced Tensile Ductility

Mechanical properties of nanocrystalline Ni-Co alloy with different microstructures

Improved Mechanical Property of Electrodeposited Nanocrystalline Nickel-Cobalt Alloy

Achieving Excellent Strength-Ductility Balance in Single-Phase CoCrNiV Multi-Principal Element Alloy

Achieving Ultra-High Strength in a Precipitation-Hardened CoCrNi-based Medium-Entropy Alloy with Partially Recrystallized Microstructure and Heterogeneous Grains

A ductile high entropy alloy strengthened by nano sigma phase

High Strength and Deformation Stability Achieved in CrCoNi Alloy Containing Deformable Oxides

Ultra-strong and Thermally Stable Nanocrystalline CrCoNi Alloy

Novel NiAl-strengthened High Entropy Alloys with Balanced Tensile Strength and Ductility

High strength and ductility in a dual-phase hetero-structured AlCoCrFeNi2.1 eutectic high-entropy alloy by powder metallurgy

Strengthening Mechanisms of Ni–Co–Cr Alloys Via Nanotwins and Nanophases

Making a Coherent L12-nano-precipitates-reinforced Ni-based Alloy Ultrastrong and Ductile by Constructing Dual Heterogeneous Structures

A novel nanostructure to achieve ultrahigh strength and good tensile ductility of a CoCrFeNiMn high entropy alloy

Towards Strength-Ductility Synergy in a CrCoNi Solid Solution Alloy Via Nanotwins

A Superior Strength-Ductility Synergy of Al 0.1 CrFeCoNi High-Entropy Alloy with Fully Recrystallized Ultrafine Grains and Annealing Twins

B2-strengthened Al-Co-Cr-Fe-Ni high entropy alloy with high ductility

Stable Ductility of an Electrodeposited Nanocrystalline Ni–20 Wt.%fe Alloy in Tensile Plastic Deformation

Dual-scale clusters enabling exceptional mechanical properties of a CoNiCr-based MP159 superalloy at 650 °C

Enhancing Strength and Ductility of a Ni-26.6Co-18.4Cr-4.1Mo-2.3Al-0.3Ti-5.4Nb Alloy via Nanosized Precipitations, Stacking Faults, and Nanotwins