Abstract:Pure copper is very soft, however, hardening the pure copper with most strengthening mechanisms leads to a significant reduction in electrical conductivity. Grain refinement is a better strengthening mechanism to maintain high enough electrical conductivity. Plastic deformation at room temperature followed by post-annealing is one of the best methods to achieve fine-grained metals and alloys. In this research, the high-temperature annealing behavior of cold-rolled electrolytic tough-pitch (ETP) copper sheets was studied. 90 % asymmetric cold rolling followed by high-temperature post-annealing at 673 K for 1, 2, 5, 10, 30, 60, and 120 min were applied on the copper. The microstructure was significantly changed with increasing annealing time from 1 to 2 min owing to full recrystallization. With increasing the annealing duration, the grain size is increased. The formation of equiaxed grains with a smaller size (∼9 μm) compared to the full-annealed (initial) sample (∼68 μm) is observed after the longest time of post-annealing (120 min) due to the pinning effect of Cu2O particles. The post-annealed copper sheets processed by asymmetric rolling (in this work) exhibited a more homogeneous microstructure through the thickness compared to the symmetric rolling due to more uniform stored strain energy. The results showed that the first deformed grains that undergo recrystallization during post-annealing are Goss-oriented grains. With an increase in the post-annealing time, the S and Copper components were eliminated and a strong Cube and P texture orientations were formed. Interestingly, after 1 min of post-annealing, the yield and tensile strength enhanced to 410.2 MPa and 418.6 MPa owing to the annealing hardening phenomenon. The hardness and strength reached a constant value after the post-annealing for 10 min and above. With increasing the post-annealing duration, the central area of fracture surfaces (consisting of ductile dimples) became larger and the outer region (consisting of flat surfaces and shear dimples) became smaller, showing a shift towards perfect ductile fracture. With the increase of post-annealing time from 1 min to 120 min, the electrical conductivity was increased from 77.6 to 97.5 %IACS. The presence of the Cube texture increased the electron mobility compared to the P orientation, by reducing the mean distance that they can travel without scatter. From the obtained results, it can be concluded that the asymmetric cold rolling followed by high-temperature post-annealing is capable of strength improvement and maintaining electrical conductivity in copper.

Self-annealing of electrodeposited copper thin film during room temperature storage

Deformation and Fracture Behavior of Electrocodeposited Alumina Nanoparticle/Copper Composite Films

Structure and Properties of Electrocodeposited Cu-Al2o3 Nanocomposite Thin Films

The kinetics and mechanism of room-temperature microstructural evolution in electroplated copper foils

Effect of low temperature annealing on microstructure and properties of copper foil

Nanoparticle Reinforced Metal Composites Prepared by Electrocodeposition

Effect of annealing processes on microstructure, mechanical properties and conductivity of Cu-12%Ag alloy composite-reinforced by fibers

Effect of High-Frequency and High-Density Current on Adhesive Strength of Copper Thin Film

Electrodeposition of Aluminum on Stainless Steel from Room Temperature Molten Salts

In Situ Study of Copper Electrodeposition on A Single Carbon Fiber

Diluting and Annealing Effects on Electromigration and Morphology of Chemical Vapor-Deposited Copper Films

Correlation study of self-annealing-induced recrystallization and grain growth mechanism in copper foil

High-temperature annealing behavior of cold-rolled electrolytic tough-pitch copper

A Study on the Microstructural Evolution, Interfacial Diffusion and Mechanical Properties of Ultra-thin Stainless Steel–Copper Composites Fabricated by Roll Bonding

Microstructure and Texture of Pure Copper under Large Compression Deformation and Different Annealing Times

Effect of annealing temperature on microstructure and tensile properties of copper/aluminum composite thin strip

Ultra-high flatness and conductivity of copper electrodeposits obtained by nano-twinned/fine-grained double layer electrodeposition

Microstructure evolution in Cu-2.13Fe-0.026P (wt%): The contribution of texture intensity to residual stress variation

COPPER PLATING FROM NON-CYANIDE ALKALINE BATHS

Electrodeposition of Nanostructured Co–Cu Thin Alloy Films on to Steel Substrate from an Environmentally Friendly Novel Lactate Bath under Different Operating Conditions

High strength high conductivity copper prepared by C-ECAP and Cryo-rolling