Abstract:Ceramics of the series (0.97- x )Bi 1/2 Na 1/2 TiO 3 - x Bi 1/2 K 1/2 TiO 3 -0.03NaNbO 3 ( x = 0, 0.02, 0.06, 0.10, 0.16, 0.20, 0.30) were prepared by the conventional mixed oxide method. Influence of Bi 1/2 K 1/2 TiO 3 content on the crystal structure, microstructure, dielectric and piezoelectric properties were studied. All compositions showed single perovskite phase and the morphotropic phase boundary (MPB) between rhombohedral and tetragonal phase existed at the point of x = 0.16. Temperature dependences of permittivity and dissipation factor of unpoled samples revealed that permittivity increased with Bi 1/2 K 1/2 TiO 3 content and it reached maximum value near the MPB. At the same time, the peak value of dissipation factor increased with the addition of Bi 1/2 K 1/2 TiO 3 . All the samples experienced two phase transitions: from ferroelectric to antiferroelectric at the first transition temperature ( T d ) and from antiferroelectric to paraelectric at the temperature ( T m ) corresponding to maximum value of permittivity. The phase transition from ferroelectric to antiferroelectric had relaxor characteristic and T d shifted to lower temperature while increasing Bi 1/2 K 1/2 TiO 3 content. The best piezoelectric properties were obtained in 0.81Bi 1/2 Na 1/2 TiO 3 -0.16Bi 1/2 K 1/2 TiO 3 -0.03NaNbO 3 ceramic with a piezoelectric constant ( d 33 ) of 146pC/N, planar electromechanical coupling factor ( k p ) of 30.3% and thickness electromechanical coupling factor ( k t ) of 53.2%. Abnormal piezoelectric properties were observed in the sample ( x = 0.20), which was attributed to the co-existence of ferroelectric and antiferroelectric phases in it.

Effect of Particles Synthesized by Different Methods on Structure and Properties of Na0.5Bi0.5TiO3 Ceramics

Effects of Nano-Sized In2O3on Sintering Behavior and Electrical Properties of 0.28Pb(in1/2nb1/2)o3-0.40Pb(mg1/3< /Sub>nb2/3)o3-0.32Pbtio3ceramics

Significant Effects of Powder Preparation Processes on the Physical Properties of Bi 0.5 Na 0.5 TiO 3 –0.06batio 3 Ceramic

Electrical Properties of Na1/2Bi1/2TiO3–BaTiO3 Ceramics

Influences of oxide chemical modified on microstructure and electrical properties of PbTiO3-Bi(Ni1/2Ti1/2)O3

Effects of Ti nonstoichiometry on microstructure, dielectric, ferroelectric and piezoelectric properties of (Na0.54Bi0.5)(0.94)Ba0.06Ti1+xO3 lead-free ceramics

Effect of Dy2O3 on the Structure and Electrical Properties of (bi0.5na0.5)0.94ba0.06tio3 Lead-Free Piezoelectric Ceramics

Influence of Different Dopants on the Piezoelectric Properties of the Na<sub>1/2</sub>Bi<sub>1/2</sub>TiO<sub>3</sub>-BaTiO<sub>3</sub>- Lead-Free Ceramics

Synthesis and Characterization of (na0.85k0.15)0.5bi0.5tio3 Ceramics by Different Methods

Effect of BaTiO3 Particles with Different Shape on Electrical Properties of (bi0.5na0.5)tio3 Piezoceramics

Effects of Sintering Temperature and KBT Content on Microstructure and Electrical Properties of (Bi.5na.5)tio3-Batio3-(bi.5k.5)tio3 Pb-free Ceramics

Size Dependent Structures and Properties of Na0.5Bi0.5TiO3-Based Ceramics for Piezoelectric Sensors

Preparation and electric properties of Bi0.5Na 0.5TiO3-Bi(Al0.5Ga0.5)O3 lead-free piezoceramics

Significant effects of powder preparation processes on the physical properties of BiNaTiO–0.06BaTiO ceramic

INFLUENCE OF NONSTOICHIOMETRY AND DOPING ON ELECTRICAL PROPERTIES OF (na1/2bi1/2)0.92ba0.08tio3 CERAMICS

STUDY ON THE PIEZOELECTRIC PROPERTIES PF (Na0.88K0.12)0.5Bi0.5TiO3 LEAD FREE PIEZOELECTRIC CERAMICS MIXED WITH CeO2 AND Sb2O3

Study on the Bi0.5Na0.5TiO3 Ceramics Prepared by Pechini Method

Influence of Different Dopants on the Piezoelectric Properties of the Na1/2bi1/2tio3-Batio3 Lead-Free Ceramics

Dielectric and piezoelectric properties of (0.97- x ) Bi 1/2 Na 1/2 TiO 3 - x Bi 1/2 K 1/2 TiO 3 -0.03NaNbO 3 ceramics

Preparation and electric properties of Bi0.5 Na0.5 TiO3- Bi (Mg0.5 Ti0.5) O3 lead-free piezoceramics

Structure and Electrical Properties of (1 − X )(na 0.5 Bi 0.5 ) 0.94 Ba 0.06 TiO 3 – X SmAlO 3 Lead-Free Piezoelectric Ceramics