Effect of Sintering Temperature on Microstructure and Electrical Properties of Na0.5Bi0.47Sr0.02TiO3-δ Ceramics

Yuxin Ma,Yunhe Wei,Minghui Kong,Run Li,Duanting Yan,Dejun wang,Runru Liu

DOI: https://doi.org/10.1088/2053-1591/ad425e

IF: 2.025

2024-04-24

Materials Research Express

Abstract:In this investigation, a series of Na0.5Bi0.47Sr0.02TiO3-δ samples are sintered from1000 to 1100°C, were synthesized utilizing the solid-state method. The XRD results indicate that all samples exhibit a perovskite phase, with the exception of those sintered at 1100 °C, which display no discernible impurity peaks.The SEM results indicate that the average grain size exhibits an increase proportionate to the sintering temperature,which attributes to the variations in the actual Na/Bi ratio. From the study of grain conductivity we can obtain that the dominant factor affecting grain conductivity is the activation energy.At 1100°C,the oxygen vacancy concentration emerges as the primary determinant of grain conductivity. It should be noticed that the phase transition temperature of the sample increases (350°C→400°C) with the increase of sintering temperature, which is due to the local A-site disorder aggravated by high temperature sintering. Therefore, reducing the sintering temperature is beneficial to improve the grain conductivity. The grain boundary conductivity initially rises, then diminishes with increasing sintering temperature.It is evident that the enhanced macroscopic grain boundary conductivity stems from a marked reduction in space charge potential within the 1000-1025°C temperature range. Within the 1050°C-1100°C temperature range,the space charge potential barely changed,the significant decrease of intrinsic grain boundary conductivity can be attributed to the surge in the coverage ratio of grain boundary impurities and the number of grain boundary impurities increased caused by the rapid reduction of grain boundary area and thermal evaporation.The research on electrical performance of NBT-based oxygen-ion conductors will promote the application of NBT-based oxygen ion conductors in solid oxide fuel cells, oxygen sensors and other fields.

materials science, multidisciplinary