Abstract:Biomass gasification based on calcium looping sorption enhanced reforming (CLSER) has the advantages of generating syngas with high purity hydrogen and simultaneously capturing CO2 in process. This study first aims to develop a novel synthetic CaO-based sorbent, addressing its tar reduction potential and mechanical strength along with cyclic carbonation reactivity. The novel sorbent was synthesized by integrating CaO with iron catalyst and an inert support based on a two-step sol gel method. Comprehensive properties of the novel sorbent including chemical components, effects on biomass pyrolysis and tar reduction, cyclic CO2 capture reactivity, morphology, and mechanical strength were examined by using various methods and facilities. The characterized chemical and physical properties were also compared with pure CaO and two referenced synthetic sorbents. Results showed that a novel sorbent (Ca-Fe-Al) consisting of CaO, iron oxide (Fe2O3), and mayenite (Ca12Al14O33) was successfully synthesized. Evolutions of tar species and CO2 during wheat-straw pyrolysis were found to be lowered in the presence of Ca-Fe-Al as determined by thermogravimetric Fourier transform infrared (TG-FTIR). The enhanced evolutions of light gases such as CO, CH4, and CO2 at temperatures higher than 580 degrees C examined by thermogravimetry-mass spectrometry (TG-MS) indicated the catalysis effects of Ca-Fe-Al on biomass tar cracking and char decomposition. Different from CaO and other synthetic sorbents, Ca-Fe-Al sorbent showed increasing carbonation capacity and reactivity with growing cycle numbers. After being hydrated, the cyclic carbonation performance of Ca-Fe-Al sorbent became superior to other sorbents. Mechanical strength of Ca-Fe-Al sorbent was also greater than that of CaO and was more suitable for long term storage.

High Temperature Co2 Capture Using Calcium Oxide Sorbent in A Fixed-Bed Reactor

Ca based high temperature CO2 absorbents for sorption enhanced reforming process

Properties of a Nano CaO/Al2O3 CO2 Sorbent

A basic study on the nano CaO-based CO2 adsorbents in FFB for CO2 capture

Regenerable MgO-based Sorbents for CO2 Capture at Elevated Temperature and Pressure: Experimental and DFT Study

Characteristics of MgO-based Sorbents for CO2 Capture at Elevated Temperature and Pressure

Promotion of MgO Sorbents with Eutectic Carbonate Doping for High-Temperature and Pressure CO2 Capture

CO2 Capture from Flue Gases Using Three Ca-Based Sorbents in a Fluidized Bed Reactor

Experiment And Modeling Of Co(2) Capture From Flue Gases In A Fluidized Bed With Limestone And Dolomite Sorbents

Experiment and Modeling of Co2 Capture from Flue Gases at High Temperature in A Fluidized Bed Reactor with Ca-Based Sorbents

Synthesis and Performance of a Nano Synthetic Ca-based Sorbent for High Temperature CO_2 Capture

Wet Mixing Combustion Synthesis of CaO-based Sorbents for High Temperature Cyclic CO2 Capture

Recent Advances on Kinetics of Carbon Dioxide Capture Using Solid Sorbents at Elevated Temperatures

Experiment research on CO2 capture from flue gases using interconnected fluidized bed reactors with Ca-based sorbent

Developing a Novel CaO-Based Sorbent for Promoted CO2 Capture and Tar Reduction

High-temperature CO 2 sorbents with citrate and stearate intercalated Ca–Al hydrotalcite-like as precursor

Reactivity and Microstructure of Synthetic CaO-based Sorbents for CO2 Capture

Numerical Simulations of CO2 Absorption by MgO-based Sorbent in a Gas–solid Fluidized Bed

Experiment of CO_2 Capture Based on Ca-based Sorbents Cyclic Calcination/carbonation Reaction

MgO-Based Granular Sorbent Pelletized by Using Ordered Mesoporous Silica as Binder for Low-Temperature CO 2 Capture

MgO-Based Granular Sorbent Pelletized by Using Ordered Mesoporous Silica As Binder for Low-Temperature CO2 Capture