Abstract:Stiffened thin plates made of high-strength steel are widely employed in ship hull structures. Their strength capacity is highly sensitive to the welding imperfections and potential extreme cyclic loading from harsh sea state. In this work, a thermal elasto-plastic finite element analysis is conducted to simulate the 3D distribution of welding-induced residual stress and distortion of stiffened thin plate structures with triple spans and triple bays varying the plate thickness and heat input. Experimental results provided by other scholars are used to validate the welding simulation. Afterwards, the ultimate strength and collapse behaviour of the welded structures under different load patterns are dealt with, including monotonic compression load, cyclic compression-tension load and cyclic compression load. Observation from numerical results indicates that, in general, the compressive strength is reduced in each considered cycle by the residual stress as the amplitude of cyclic compression-tension load approximates to the ultimate compressive strain. When this parameter is much greater than the ultimate compressive strain or the stiffened plate is subjected to cyclic compression load, the reduction in ultimate strength is significant in the first cycle, whereas the reduction is ignorable in the later cycles. Besides, if the buckling mode of initial deflection with antisymmetric configuration is superposed to the symmetric out-of-plane welding distortion, impact of the residual stress will be diminished as the asymmetry becomes notable.

The Influence of Welding Technique on Irregular Thick Spherical Structure Deformation

Numerical Prediction and Control of Deformation and Residual Stress in Double-Sided Arc Welding of Large Pressure Hull

Simulation and prediction for welding deformation on welding procedure of hand pallet truck

Reverse Deformation Design for Bending Control in Welding of Ring Stiffeners

Prediction of Double-Sided Arc Welding Deformation Based on Dynamic Heat Distribution Model and TEP-FE Approach

Research Of Weld On Axial Buckling Stress Of Multilayer Combined Cylindrical Shells

Numerical simulation of residual stress and deformation on laser welding of "grooved-coat" structure

Effect of Welding Residual Stress on Plastic Buckling of Axially Compressed Cylindrical Shells with Patterned Welds

Welding Sequence in Large Thin-Walled Structures by Means of Local-Global and Welding Macro Element

Evaluation Method for Inherent Deformation and its Application in Predicting Welding Distortion on Hull Blocks

Comparative Study of Welding Deformation of a Stiffened Panel under Various Welding Procedures

Investigating Welding Distortion of Thin-Plate Stiffened Panel Steel Structures by Means of Thermal Elastic Plastic Finite Element Method

Welding Deformation Predictions of Thin-Wall Cylinders Using a Local-Global Method

Welding-induced Buckling Prediction for Large Thin-Walled Cylindrical Structures with Non-Uniform Stress Fields by Friction Stir Welding

Application of Inertia Relief in the Prediction of Welding Deformation for Large Complex Structures

Effect of welding parameters on welding inherent deformations in structure materials by FEM

The Influence of Welding-Induced 3D Residual Stress and Distortion on the Ultimate Strength of Multi-Stiffened Thin Plate Structures under Cyclic Load

Influence of Initial Structural Dimensions of Plates on Welding Distortion

Numerical Analysis on Optimizing Welding Sequence of Large-Sized Bottom Structure for Controlling Welding Distortion

Review on finite element analysis of welding deformation and residual stress

Prediction and Controlling for Welding Deformation of Propeller Base Structure