Abstract:In this paper, the composite membranes based on poly(vinylidene fluoride) (PVDF) with different amounts of halloysite (HNT) nano-filler were prepared by phase inversion method for the application of lithium ion batteries. The effect of the content of HNT on the crystallinity and morphology of the composite membranes were investigated. The results showed that the crystallization behaviors of the HNT/PVDF composite membranes were reduced with the increase of HNT filler content. Furthermore, the introduction of HNT into PVDF matrix remarkably affected the formation rate of nuclei which could evolve into pores to change surface morphology. The HNT/PVDF composite membranes showed the sufficient porosity and good affinity between the eletrolyte as well as the electrode, which led to superb electrolyte uptake and low interfacial impedance. Among HNT/PVDF composite membranes, in particular, the 4-HNT/PVDF composite membrane with 4 wt% HNT content had a great electrolyte uptake (430.2%), superior electrochemical stability window (4.5 V), high ionic conductivity (2.4 mS/cm), and low interfacial impedance (63 Omega). The cells assembled with the 4-HNT/PVDF composite membranes obtain discharge capacities of 164.72 mAh/g (0.1C) and 134.88 mAh/g (2C), corresponding to 96.89% and 79.34% of the theoretical capacity of LiFePO4 (170 mAh/g), respectively, better cycle performance (with capacity retention 89.12% after 100 cycles) at 0.5C and excellent rate performance. It is concluded that the content of HNT deeply affects membrane performance. Therefore, the 4-HNT/PVDF composite membranes could be a good option of high performance lithium ion batteries. (C) 2019 Elsevier B.V. All rights reserved.

PREPARATION AND ELECTROCHEMICAL CHARACTERISTICS OF POLYMER ELECTROLYTE MEMBRANES BASED ON SAN/PVDF-HFP BLENDS

Effects of PDMS with Polyether Side Chains on the Fluoropolymer Based Gel Lithium Electrolytes

Preparation Of Pvdf/P(Mma-Co-Pegma) Porous Membranes Via Phase Inversion Process For Gel Polymer Electrolyte

Preparation and Properties of Gel Membrane Containing Porous PVDF-HFP Matrix and Cross-Linked PEG for Lithium Ion Conduction

Preparation of PVDF- HFP Porous Membrane Via Thermally Induced Phase Separation and Application in Lithium Ion Battery

Preparation and Characterization of PVDF/P（MMA-co-DMAEMA） Separators for Lithium Battery

MICROPOROUS PVDF-HFP-BASED POLYMER MEMBRANES FORMED FROM SUPERCRITICAL CO2 INDUCED PHASE SEPARATION *

Complementary Hybrid Design of Solvated Electrolyte Membranes Enabled by Porous Carbon Reinforcement for High-Performance Lithium Batteries

Preparation of Halloysite/polyvinylidene Fluoride Composite Membrane by Phase Inversion Method for Lithium Ion Battery

Preparation and Properties of Poly (vinylidene Fluoride)/poly(dimethylsiloxane) Graft (poly(propylene Oxide)-Block-poly(ethylene Oxide)) Blend Porous Separators and Corresponding Electrolytes

Composite Polymer Electrolyte Membranes Supported by Non-Woven Fabrics for Lithium-Ion Polymer Batteries

A novel polymer electrolyte based on PMAML/PVDF-HFP blend

Preparation and Characterization of PVDF-HFP/MG49 Based Polymer Blend Electrolyte

Preparation Of Poly (Dimethylsiloxane) Graft (Poly(Propylene Oxide)-Block-Poly (Ethylene Oxide) Modified Pvdf Separator And Its Use In Lithium Ion Batteries

PVDF-HFP-based porous polymer electrolyte membranes for lithium-ion batteries

Investigation on PVDF-HFP microporous membranes prepared by TIPS process and their application as polymer electrolytes for lithium ion batteries

Study on PVDF-HFP/PMMA/CMC Blended Polymer as Membrane for Lithium-Ion Batteries

Preparation and Characterization of a Novel Kind of Polymer Electrolyte Composite Membrane for Lithium-Ion Battery

"Soggy Sand" Polymer Composite Nanofiber Membrane Electrolytes for Lithium Ion Batteries

In Situ Composite of Nano SiO2–P(VDF-HFP) Porous Polymer Electrolytes for Li-ion Batteries

Preparation of Pvdf/Pmma Blend Microporous Membranes for Lithium Ion Batteries Via Thermally Induced Phase Separation Process