Abstract:The high temperature tensile test of Ti-47.5Al-2.5 V-1.0Cr-0.2Zr alloy was carried out by electronic universal testing machine under the condition of 750–900 °C/10 −5 –10 −3 s −1 . The hot tensile stress-strain curves were analyzed, and the constitutive model under hot tensile conditions was established. The microstructure transformation rule and deformation mechanism during tensile process were determined. The results show that the hot tensile curve is longer in the steady-state flow stage corresponding to lower strain rate and higher tensile temperature, the true stress declines and the elongation at break increases. The constitutive equation was established based on the tensile curve data, and the corresponding thermal activation energy was 310.3 kJ/mol. As the rise of tensile temperature and the decline of strain rate, the proportion about cross-layer fracture in the tensile fracture morphology decreases, the number of dimples increases, more lamellar structures change into recrystallized structures, and the softening effect of the alloy is more obvious. The dislocation deformation mechanism mainly includes the existence of dislocation slip and climb, dislocation intersection and dislocation ring or dislocation network formation. Twinning deformation is also another important mechanism of high temperature tensile deformation of TiAl alloy. Twins are formed in parallel with each other, so that the deformation can be further carried out. The dislocations and twins in the deformed microstructure will provide nucleation conditions for recrystallized grains. The dynamic recrystallization(DRX) grains are preferentially formed around the grain boundary and the vicinity of dislocation and twin is also preferred nucleation site for DRX. The DRX behavior is the main softening mechanism, and DRX size and volume fraction corresponding to lower tensile rate and higher tensile temperature are larger.

High strain torsion of a TiAl-based alloy

Shear Texture Formation during High-Strain Torsion of Titanium Aluminides

Transmission Electron Microscopy Investigation of Ti2Al Precipitation in Titanium Aluminides During High-Strain Torsion

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

In-situ Synchrotron High Energy X-ray Diffraction Study on the Deformation Mechanisms of D019-α2 Phase During High-Temperature Compression in a TiAl Alloy

Γ-Phase Transformation, Dynamic Recrystallization and Texture of a Forged TiAl-based Alloy Based on Plane Strain Compression at Elevated Temperature

Hot Deformation Behavior, Dynamic Recrystallization, and Texture Evolution of Ti–22Al–25Nb Alloy

Plastic Deformation Behavior of TiAl Based Alloy at High Temperature

In-situ synchrotron high energy X-ray diffraction study on the deformation mechanisms of D0 19 -α 2 phase during high-temperature compression in a TiAl alloy

On the thermal evolution of high-pressure torsion processed titanium aluminide

Instability of the O-phase in Ti–22Al–25Nb Alloy During Elevated-Temperature Deformation

Hot Tensile Properties, Microstructure Evolution and Fracture Mechanisms of Ti-6Al-4V Alloy with Initial Coarse Equiaxed Phases

Study on high temperature tensile constitutive behavior and deformation mechanism of Ti-47.5Al-2.5 V-1.0Cr-0.2Zr alloy

Investigation on the microstructure evolution and dynamic recrystallization mechanisms of TiAl alloy at elevated temperature

In-situ Synchrotron High Energy X-ray Diffraction Study on the Internal Strain Evolution of D019-α2 Phase During High-Temperature Compression and Subsequent Annealing in a TiAl Alloy

Study of Deformation Behaviour of TiAl-based Alloy at High Temperature

Study on High-Temperature Flow Behavior and Substructure and Texture Evolution of TA15 Titanium Alloy

On the High Temperature Deformation of a Directionally Solidified Γ-Tial Alloy

High-temperature tensile deformation behavior and microstructure evolution of Ti55 titanium alloy

Deformation and Microstructure Evolution above the B2 Transus of Ti-22Al-25Nb (at%) Orthorhombic Alloy

Characteristics of High-Temperature Deformation Behavior of Ti-45Al-2Cr-3Ta-0.5W Alloy