Abstract:Abstract Several high-temperature body-centered cubic (bcc) structural materials such as Nb-, Zr- and Ti-based alloys undergo phase separation, which is a second-order phase transformation, whereby the host lattice decomposes into distinct bcc domains with different compositions. Using atomistic simulations, we studied the high-strain-rate response of bcc-forming Nb– x Zr ( x = 0, 25, 50 at.%) alloys. To induce phase separation in our starter alloy, we first employed hybrid Monte Carlo/Molecular Dynamics simulations in single crystals of Nb– x Zr at 1000 K. Subsequently, these crystals were deformed along different crystallographic orientations ( $$\langle 001\rangle$$ ⟨ 001 ⟩ , $$\langle 110\rangle$$ ⟨ 110 ⟩ and $$\langle 111\rangle$$ ⟨ 111 ⟩ ) at a strain rate of $$10^{+8} s^{-1}$$ 10 + 8 s - 1 , to investigate orientation dependent mechanical response. The phase-separated Nb– x Zr microstructures exhibited distinct bcc domains enriched in either Zr or Nb. Notably, Nb-50 at.%Zr contained coarser Zr-domains compared to Nb-25 at.%Zr. The Zr-rich domains acted as “soft” inclusions, resulting in reduced peak strengths in the following order: pure Nb (Nb-0 at.%Zr) > Nb-25 at.%Zr > Nb-50 at.%Zr. This implies that phase separation causes softening in Nb– x Zr. We also discovered two deformation pathways that depended on the crystallographic orientation: (i) For deformation along $$\langle 110\rangle$$ ⟨ 110 ⟩ and $$\langle 111\rangle$$ ⟨ 111 ⟩ directions: Elastic deformation was followed by dislocation plasticity on $$\{110\}\langle 111\rangle$$ { 110 } ⟨ 111 ⟩ slip systems; and (ii) For deformation along $$\langle 001\rangle$$ ⟨ 001 ⟩ direction: Elastic deformation was followed by the formation of a volumetric fcc structure, twinning on {112} $$\langle 111\rangle$$ ⟨ 111 ⟩ system, and the formation fcc-phase at the twin/matrix interfacial regions. This was ultimately accompanied by dislocation plasticity on $$\{110\}\langle 111\rangle$$ { 110 } ⟨ 111 ⟩ slip system. The bcc $$\rightarrow$$ → fcc displacive transformation facilitated {112} $$\langle 111\rangle$$ ⟨ 111 ⟩ twinning when Nb– x Zr was deformed along $$\langle 001\rangle$$ ⟨ 001 ⟩ . Our investigation shows that softening of bcc alloys can result from a coupling of mechanisms involving local solute segregation, displacive phase transformation and twinning occurring across multiple slip planes.

On the Possibility of Cleavage in Nb

Shear Band Mediated Ω Phase Transformation in Nb Single Crystals Deformed at 77 K

Ideal Strength of Bcc Molybdenum and Niobium

Shock-induced ?" martensitic transformation in Nb single crystals

Theoretical Calculations of the Ideal Strength of Ni, NiAl and Ni3Al in Tension and Shear

First-principles investigation of elastic anomalies in niobium at high pressure and temperature

Fracture of Laminated and In Situ Niobium Silicide-Niobium Composites

Ductile and brittle crack-tip response in equimolar refractory high-entropy alloys

Transformation- and twinning-induced plasticity in phase-separated bcc Nb-Zr alloys: an atomistic study

Structural Transition of Mnnb2o6 under Quasi-Hydrostatic Pressure

Ab-initio tensile tests applied to BCC refractory alloys

Experimental and theoretical confirmation of an orthorhombic phase transition in niobium at high pressure and temperature

Nanoscale ductile fracture and associated atomistic mechanisms in a body-centered cubic refractory metal

Micromechanism in fracture toughness of NbCr2 laves phase improved by nickel alloying: first-principles calculation

Mechanism of Interstitial Atoms on Oxidation and Fracture of Niobium-Silicon Alloys

Deformation and failure of shocked bulk Cu–Nb nanolaminates

The bain and orthorhombic paths of the bcc–fcc transformation in a bcc metal

Atomistic simulations on ductile-brittle transition in <111> BCC Fe nanowires

Ductility in Crystalline Boron Subphosphide (b12p2) for Large Strain Indentation

Colossal Shear-Strength Enhancement of Low-Density Cubic Bc2n by Nanoindentation

Mechanistic origin of high strength in refractory BCC high entropy alloys up to 1900K