Development of Shengma/cotton Blended Yarn

Bo Zhao

DOI: https://doi.org/10.3969/j.issn.1001-7415.2006.06.014

2007-01-01

Abstract:The characteristics and performances of Shengma fiber are introduced,and through its process test,the influences of material property and spinning process on the yarn quality are analyzed with effective technical measures to improve yarn quality discussed.

What problem does this paper attempt to address?

DEVELOPMENT OF SHENG-BAST FIBER/FINE-DENIER POLYESTER/COTTON FIBER BLENDED YARN PRODUCTS

Bo ZHAO

DOI: https://doi.org/10.3969/j.issn.1672-500x.2006.03.003

2006-01-01

Abstract:The characteristics and performance of Sheng-bast fiber and fine-denier polyester fiber were introduced.Through technical experiment,the influencing factors for the yarn quality such as the material properties,the spinning process etc.were analyzed,the effective measures to increase yarn quality were discussed.
Development of Sheng-bast fiber/Bamboo fiber blended yarn productions

Zhao bo

2011-01-01

Abstract:In order to develop the Sheng-bast fiber/Bamboo fiber blended yarn,the characteristics and performance of Sheng-bast fiber and bamboo fiber are introduced.According to processing practice and processing testing,the influences of the material properties,the spinning process etc.on the yarn quality are analyzed.At the same time,the new technical measures are introduced,and the effective methods that increasing yarn quality are discussed.The results show that all quality standards have been achieved.
Processes of Shengma Fibers/fine Denier Polyester/cotton Fiber Blended High Count Yarn

Bo ZHAO

DOI: https://doi.org/10.3969/j.issn.1673-0356.2008.01.031

2008-01-01

Abstract:The characteristics of the shengma fiber and fine denier polyester fiber were introduced. According to the performance of shengma fiber and fine denier polyester fiber, the influence of the spinning processes on the blended yarn qualities were analyzed. And the methods to increase the blended yarn qualities were then further discussed.
Development of bamboo fiber/cotton fiber blended fine number yarn

Zhao Bo

DOI: https://doi.org/10.3969/j.issn.1007-6867.2006.09.011

2006-01-01

Abstract:The characteristics and performance of bamboo fiber are introduced.According to processing test,the influences of the material properties,the spinning process etc.on the yarn quality are analyzed.The effective measures that increasing yarn quality are discussed.
Development of knitting yarns with dyed-cotton fibers

Zhao Bo

DOI: https://doi.org/10.3969/j.issn.1007-6867.2007.07.015

2007-01-01

Abstract:The properties of dyed-cotton fiber are introduced.Some factors affecting the yarn quality such as properties of fiber and spinning process are analyzed by process test.The corresponding technical measures are put forward.
Studies on the Properties of Naturally Colored-Cotton and Its Spinning Processes

Miao Du

2004-01-01

Abstract:In the paper,are introduced the properties of naturally colored-cotton with its processing characteristic and parameters of naturally colored-cotton spandex discussed.
Development of Ramie/bamboo/cotton Blended High Counts Yarn

Bo ZHAO

DOI: https://doi.org/10.3969/j.issn.1673-0356.2009.05.023

2009-01-01

Abstract:The characteristics of ramie and bamboo fiber were introduced.By process test,the influent factors of yarn quality such as fiber property,spinning process were analysed.And the measures for promoting quality of ramie/bamboo/cotton blended high counts yarn were analysed.
Study on the Effect of Pre-Tension on Performance of Polyester/cotton/silk Sirofil Composite Yarn

Miao Du

2007-01-01

Abstract:In this paper are tested the influence of pre-tension of the raw silk and polyester filament on the property of the tricomponent composite yarn with the causes of the influence studied.And optimized technical parameters of the pre-tension are thus obtained: 25 cN for polyester filament and 15 cN for raw silk.
Developing Blended Yarn with Jute Fiber/Fine Denier Viscose/Tencel Fiber

Bo ZHA

DOI: https://doi.org/10.3969/j.issn.1673-0356.2009.03.026

2009-01-01

Abstract:Take the jute fiber blended yarn with fine denier viscose fiber and tencel fiber for example,according to the process testing and experiment,some factors affecting the jute fiber blended yarn's quality such as fiber properties,spinning process are analyzed,and the measures that could improve the yarn quality were discussed.
Development Blended Yarn of Anionic Polypropylene/Cotton Fiber

Bo ZHAO

DOI: https://doi.org/10.3969/j.issn.1673-0356.2009.04.013

2009-01-01

Abstract:The character of anionic polypropylene fiber was introduced.Based on the character of anionic polypropylene/cotton fiber,the factors of spinning influencing the yarn quality were analysed,and the measures improving the blended yarn quality were discussed.
Study on the process of milk protein fiber/flax blended yarn

ZHAO Bo

DOI: https://doi.org/10.3969/j.issn.1673-0356.2008.04.015

2008-01-01

Abstract:The characteristics of the regenerated milk protein fiber and flax fiber were introduced.According to the performance of milk protein fiber and flax fiber,the influence of the performance of blended yarn to spinning processes and the blended yarn qualities were analyzed.Then the various measures to increase the blended yarn qualities were discussed.
DEVELOPMENT OF THE FAR-INFRARED POLYESTER/BAMBOO FIBER/ACRYLIC BLENDED KNITTING YARNS

Bo ZHAO

DOI: https://doi.org/10.3969/j.issn.1672-500x.2012.04.003

2012-01-01

Abstract:According to the characteristics of far-infrared polyester,bamboo fiber and acrylic,together with the practical production,this paper discusses various measures that increasing the blended yarns' quality.The results show that the processing principles of the abbreviated system,multiple bale breaking,small beating,slow speed,and multiple blending are adopted in the picking process;the light quantum,middle gauge,middle speed,large transfer coefficient,and small tension draft are used in the carding process;the light quantum,slow speed,heavy pressure,straight draft,large gauge are used in the drawing process;the heavy pressure,slow speed,large gauge,middle twist,and small tension are presented in the roving process;and the middle speed,large twist factor,heavy pressure,large gauge,middle hardness rubber-covered roll,and small nip gauge are adopted in the spinning process,which can all increase the quality of blended yarns.
DEVELOPMENT OF CUPRAMMONIUM RAYON/BAMBOO FIBER BLENDED KNITTING YARN

Bo ZHAO

DOI: https://doi.org/10.3969/j.issn.1672-500x.2009.02.004

2009-01-01

Abstract:The characteristics and performance of cuprammounium rayon and bamboo fiber were introduced,and the ring-spinning process parameters for the two fibers were analyzed,which provided reference for improving blended knitting yarn.
Development regenerated milk protein fiber/cashmere wool blended yarn

Zhao Bo

DOI: https://doi.org/10.3969/j.issn.1007-6867.2007.01.017

2007-01-01

Abstract:The characteristics of regenerated milk protein fiber are described. The influences of the fiber performance and carding technology on the blended knitting yarn quality are analyzed. The various methods for improving quality of blended yarn are discussed.
TECHNOLOGY RESEARCH ON COMBING FINE COUNT YARN OF MILK PROTEIN FIBER BLENDED WITH COTTON

Bo ZHAO

DOI: https://doi.org/10.3969/j.issn.1672-500x.2007.01.002

2007-01-01

Abstract:The paper introduced the characteristics of milk protein fiber.Based on the technological experiments and tests,the influence of fiber property and spinning technology on milk protein fiber blended yarn quality was analyzed,and the effective measures to improve its quality were discussed.
STUDY ON THE SPINNING FEASIBILITY OF BLENDED COMBED YARN WITH NEGATIVE ION VISCOSE FIBER/ZEIN FIBER/COTTON

Bo ZHAO

DOI: https://doi.org/10.3969/j.issn.1672-500x.2009.03.002

2009-01-01

Abstract:The properties of negative ion viscose fiber and zein fiber are introduced. Some factors influencing the yarn quality such as fiber properties, spinning process are analyzed by process test, and the corresponding technical measures are put forwarded.
The Study of Lycoell Bamboo Fiber Spinnability and the Development of Its Blended Yarn Products

ZHAO Bo

DOI: https://doi.org/10.3969/j.issn.1674-2346.2014.03.004

2005-01-01

Abstract:The paper introduces the basic characteristics and performance of PLA fiber. The processing parameters of PLA/Cotton blended yarn are analysed and discussed, which gives guidance for new product development.
EXPLOITATION AND PROCESS STUDY ON HEMP/COLOUR COTTON BLENDED YARN

赵博

DOI: https://doi.org/10.3969/j.issn.1009-265x.2012.05.008

2006-01-01

Abstract:Characteristic of the hemp and colour cotton fiber were presented.Through process experiment and analysis,the influence of some factors such as fiber property,spinning process etc.to the quality of hemp fiber blended yarn was discussed,and some rational process parameters were provided,which was good to improve the quality of blended yarn.
Development of Multifunctional Negative Oxygen Ion Fiber Yarn

Zhao Bo

DOI: https://doi.org/10.3969/j.issn.1001-7415.2005.11.014

2005-01-01

Abstract:Property speciality of negative oxygen ion fiber was introduced.Influences on negative oxygen ion fiber pure yarn quality and blended yarn quality of fiber property and spinning technology parameters were analyzed through technology test and practice.Technique measures to enhance yarn quality were also discussed.
Product Development and Process Study of Composite Yarn

Bo ZHAO

DOI: https://doi.org/10.3321/j.issn:0253-9721.2005.04.036

IF: 2.3

2005-01-01

Textile Research Journal

Abstract:The spinning process principle of composite yarn was introduced.According to the rebuilding cotton spinning machine and based on the practice in the spinning process,spinning technological process of composite yarn is defined.Some experiments on the primary processing parameters of the composite spinning yarn were carried out,and the influences of spinning factors on composite yarn quality were analyzed by the spinning processes.The problems of end-breakage and unevenness etc. of composite yarn in the spinning process were resolved by reasonable spinning process configuration.The effective technical measures and process parameters were discussed.The results could be as a reference data for improving the quality of composite yarn and developing the new products further.

Development of Shengma/cotton Blended Yarn

DEVELOPMENT OF SHENG-BAST FIBER/FINE-DENIER POLYESTER/COTTON FIBER BLENDED YARN PRODUCTS

Development of Sheng-bast fiber/Bamboo fiber blended yarn productions

Processes of Shengma Fibers/fine Denier Polyester/cotton Fiber Blended High Count Yarn

Development of bamboo fiber/cotton fiber blended fine number yarn

Development of knitting yarns with dyed-cotton fibers

Studies on the Properties of Naturally Colored-Cotton and Its Spinning Processes

Development of Ramie/bamboo/cotton Blended High Counts Yarn

Study on the Effect of Pre-Tension on Performance of Polyester/cotton/silk Sirofil Composite Yarn

Developing Blended Yarn with Jute Fiber/Fine Denier Viscose/Tencel Fiber

Development Blended Yarn of Anionic Polypropylene/Cotton Fiber

Study on the process of milk protein fiber/flax blended yarn

DEVELOPMENT OF THE FAR-INFRARED POLYESTER/BAMBOO FIBER/ACRYLIC BLENDED KNITTING YARNS

DEVELOPMENT OF CUPRAMMONIUM RAYON/BAMBOO FIBER BLENDED KNITTING YARN

Development regenerated milk protein fiber/cashmere wool blended yarn

TECHNOLOGY RESEARCH ON COMBING FINE COUNT YARN OF MILK PROTEIN FIBER BLENDED WITH COTTON

STUDY ON THE SPINNING FEASIBILITY OF BLENDED COMBED YARN WITH NEGATIVE ION VISCOSE FIBER/ZEIN FIBER/COTTON

The Study of Lycoell Bamboo Fiber Spinnability and the Development of Its Blended Yarn Products

EXPLOITATION AND PROCESS STUDY ON HEMP/COLOUR COTTON BLENDED YARN

Development of Multifunctional Negative Oxygen Ion Fiber Yarn

Product Development and Process Study of Composite Yarn