Abstract:A liquid-metal based capacitive soft pressure microsensor is proposed in this work for measuring pressure in microchannels. To measure the pressure of the target microchannel, a short detection channel is fabricated and connected to the target microchannel. Because the detection channel has only one outlet at the end which is connected to the target microchannel, the fluid in the detection channel will stay still during the measurement and the pressure remains constant inside the detection channel. A segment of reference fluid which is immiscible with the working fluid is sealed inside the detection channel. Because the chip material is soft, the pressure change will lead to the movement of the interface between the reference fluid and working fluid inside the detection channel. A pair of liquid metal electrodes are fabricated on both sides of the detection channel. By measuring the capacitance between these two liquid metal electrodes, the movement of the interface can be detected, and thus the pressure change can be detected as well. To minimize the influence from the environment, two liquid metal shield layers are placed on the top and the bottom of the microchannel layer separately. The microsensor was first tested in a microfluidic system and then utilized to measure the blood pressure of rabbit carotid artery in vivo. The experimental results showed excellent stability and linear correlation between capacitance and the value of fluid pressure. The pressure sensor can achieve a resolution of 7.5 mmHg within a pressure range of 20-300 mmHg. This work provides a promising approach to develop an implantable blood or intraocular pressure-monitoring device for clinical use.

Implementation and Characterization of a Femto-Farad Capacitive Sensor for Pico-Liter Liquid Monitoring

A Low Excitation Working Frequency Capacitively Coupled Contactless Conductivity Detection (C4D) Sensor for Microfluidic Devices

A Silicon Mems Structure for Characterization of Femto-Farad-Level Capacitive Sensors with Lock-In Architecture

Liquid level measurement using a single electrode capacitive sensor made of carbon nanotube-paper composite

Capacitive and Non-Contact Liquid Level Detection Sensor Based on Interdigitated Electrodes with Flexible Substrate

White-light interferometric fiber optic liquid level sensor based on MEMS Fabry-Perot cavity

Development of A Novel Micro Fia-Isfet Integrated Sensor

Development of A Cmos-Mems Rf-Aerogel-Based Capacitive Humidity Sensor

A Capacitive Pressure Sensor Seamlessly Embedded in the Microchannel

Microfabricated Capacitive Vacuum Sensor Based on MEMS

Ultrahigh Sensitivity Resonant Liquid Sensor Based on 3D Comb-Shaped Capacitive Structures

Design of capcitive sensor for liquid level measurement based on operation method

Design and Fabrication of a MEMS Capacitance Vacuum Sensor Based on Silicon Buffer Block

Liquid metal-based bio-inspired capacitive flow sensor

A Novel Sensor for Measurement of Liquid Level and Low Concentration of Electrolytic Solution

Micro Capacitive Vacuum Sensor Based on MEMS

A Capacitive Transparent Liquid Concentration Detecting System Based on LabVIEW

A Miniature Liquid Flowmeter Using All-Fiber Fabry–Perot Cavity for Real-Time Measurement

A Liquid Metal Based Capacitive Soft Pressure Microsensor.

A Film Bulk Acoustic Liquid Concentration Sensor Integrated with Microchannel

Design, Fabrication and Test of a Monolithic Capacitive Pressure Sensor