Abstract:For spot scanning dark-field scattering technology, the defocus caused by the change in wafer surface height decreases the defect detection rate and size measurement repeatability. The demand for accurately and rapidly measuring the wafer surface height online is becoming increasingly urgent. The defect detection system integrates scattering, reflection, film, and topography defect detection channels. The integration of laser-triangulation-based defocus measurement into the bright-field optical path is proposed. The laser beam is directed onto the surface of the wafer, and the reflected light is transmitted through a lens onto the photosensitive surface of a four-quadrant detector. This detector captures both the strength and position of the reflected signal simultaneously. In this paper, a triangulation-modified model is established to obtain the height of each inspection spot on the wafer surface through the position signal of the reflected image. When the signal-to-noise ratio of the simulated reflection image position is 20 dB, the signal-to-noise ratio of the height measurement resolved by the triangulation-modified model is 41 dB, and the measurement error is less than 0.2 μm, indicating that the model has a noise suppression effect. The spot-scanning imaging system is established, and the height measurement results of the triangulation measurement model are verified using a laser interferometer. Within the travel range of 69 μm, the system has a measurement accuracy better than ±1 μm and a measurement repeatability better than ±0.2 μm, which meet the measurement requirements of the spot scanning imaging system. The system is utilized for defect detection and defocus measurement of the wafer surface, along with the motion mechanism, to accurately and rapidly obtain the height distribution of the wafer surface.

Method of In-Process Measurement of Wafer Surface Quality Based on Laser Scattering Principle

Survey of measurement methods for surface roughness

Roughness Characterization of Well-Polished Surfaces by Measurements of Light Scattering Distribution

Study on the Influence of Roughness on the Detection for Mechanical Characteristics of the Machined Surface by Surface Acoustic Wave Dispersion Theory

A Measurement System for the Roughness of Ultra Smooth Surface with Large Aperture

Real Time Measurement of Surface Roughness Using Laser Technique

Nanometer Scale Roughness Measurements with Atomic Force Microscopes

Width Gauging of Surface Slot Using Laser-Generated Rayleigh Waves

Electromagnetic wave scattering simulation from precision grinding SiC surface under the influence of suspended micro-particles

Non-Contact Surface Roughness Measurement by Implementation of a Spatial Light Modulator

The Acoustic Micro Integrated Detection Technique for Silicon Wafer Processing

Measurement of Device Surface Profile and Roughness

Surface Topography Measurement of Mirror-Finished Surfaces Using Fringe-Patterned Illumination

Application of incoherence diffraction for inspection of surface roughness

A new optical technique for roughness measurement on moving surface

Light-Scattering Method for Characterizing Optical-Surfaces

Light-Scattering Method, Inspection Of Diamond Turning Process

Nanoscale surface roughness measurement based on frequency-domain interferometry principle

A Novel Wafer Defocus Measurement Method for Spot-Scanning Imaging System Using Laser Triangulation

Width and Depth Gauging of Rectangular Subsurface Defects Based on All-Optical Laser-Ultrasonic Technology

A Study on the Surface Quality and Damage Properties of Single-Crystal Silicon Using Different Post-Treatment Processes