Abstract:Carbon fiber composites composed of carbon fiber and pyrolytic carbon (PyC) matrix have great potential application in the brakes of aircrafts, where the combination of high mechanical strength and excellent frictional properties are required. In this work, two-component silicon-based interlocking enhancements were designed and constructed into carbon fiber composites for boosting the mechanical and frictional properties. Specially, silicon carbide nanowires (SiCnws) and silicon nitride nanobelts (Si3N4nbs) could form interlocking architectures, where SiCnws are rooted firmly on the carbon fiber surface in the radial direction and Si3N4nbs integrate the PyC matrix with carbon fibers together via a networked shape. SiCnws–Si3N4nbs not only refine the PyC matrix but also promote the bonding of the fiber/matrix interface and the cohesion strength of the PyC matrix, thus enhancing the mechanical and frictional properties. Benefiting from the SiCnws–Si3N4nbs synergistic effect and interlocking enhancement mechanism, the interlaminar shear strength and compressive strength of carbon fiber composites increased by 88.41% and 73.40%, respectively. In addition, the friction coefficient and wear rate of carbon fiber composites decreased by 39.50% and 69.88%, respectively. This work could open up an interlocking enhancement strategy for efficiently fabricating carbon fiber composites and promoting mechanical and frictional properties that could be used in the brakes of aircrafts.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c04682?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c04682</a>.Experimental section, XRD and XPS patterns, SEM images, growth mechanism, mechanical properties, and frictional properties of as-prepared composites in this work (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c04682/suppl_file/am1c04682_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Microstructures and Improved Wear Resistance of 3D Needled C/SiC Composites with Graphite Filler

Mechanical and tribological properties of C/C–SiC ceramic composites with different preforms

Microstructures and properties of C/C–SiC composites derived from different gaseous carbon matrix precursors

Investigation of Impact of C/Si Ratio on the Friction and Wear Behavior of Si/SiC Coatings Prepared on C/C-SiC Composites by Slurry Reaction Sintering and Chemical Vapor Infiltration

Interfacial Regulation and Fracture Mechanism of Al–Si/SiC Composites Infiltrated under Super-Gravity Field

Mechanical and ablation properties of 3D orthogonal woven C/C-SiC composite based on high-solid-loading slurry impregnation

Friction and Wear Properties of Carbon/carbon Composites with Different Martix Carbon

The effect of alumina-based sintering aid on the microstructure, selected mechanical properties, and coefficient of friction of Cf/SiC composite prepared via spark plasma sintering (SPS) method

The Microstructure and Wear Characteristics of Cu–Fe Matrix Friction Material with Addition of SiC

SiC Nanowire–Si 3 N 4 Nanobelt Interlocking Interfacial Enhancement of Carbon Fiber Composites with Boosting Mechanical and Frictional Properties

Effect of SiC content on the mechanical behaviour of a three-dimensional needled C/SiC composite

Ceramic waste SiC particle-reinforced Al matrix composite brake materials with a high friction coefficient

Microstructure of C/SiC Braking Material

Microstructure, mechanical and friction-wear properties of SiC-WC composite with Al and C as sintering aids

Enhancement of Tribological Properties in Siliconized Graphite Via Hierarchically Hybrid SiC/C Composite

Tribological properties of reaction-formed graphite/SiC composites under water-lubricated conditions

Enhanced braking performance of copper metal matrix composites incorporating fine mosaic pitch coke when mated with 30CrMnVA and C/C-SiC

Fabrication and Process Optimization of Chinese Fir-Derived SiC Ceramic with High-Performance Friction Properties

Modifying C/C–SiC brake pads with different Fe–Si alloy phases to improve the wear resistance of full-carbon/ceramic brake pair

Microstructure and Mechanical Properties of Unidirectional, Laminated Cf/SiC Composites with α-Al2O3 Nanoparticles as Filler

Microstructure, mechanical properties and wear behavior of Mg matrix composites reinforced with Ti and nano SiC particles