Abstract:SiC/SiC composites, prepared by reactive melt infiltration (RMI), exhibit exceptional properties. However, the presence of residual Si in the composite matrix can significantly compromise their high-temperature mechanical properties. Addressing the issue of high-content residual Si aggregation remains a crucial focus of research in order to fully unlock the application potential of SiC/SiC composites prepared by RMI. In this work, a special porous carbon (C g ) is successfully synthesized and introduced into the porous 2D SiC/SiC composites prepared by CVI. The unique pore structure of the SiC/SiC-C g is thoroughly analyzed, along with its liquid Si infiltration process. The difference in coefficient of thermal expansion (CTE) between SiC and C g can cause thermal stress, which can destory the C g structure. Consequently, the C particles detach from the C g skeleton and react with liquid Si to create SiC. This process effectively separates residual Si and helps alleviate the negative effects of residual Si aggregation. The microstructure and phase distribution of SiC/SiC composites obtained by liquid Si infiltrating different C structures are investigated and compared, and it demonstrates the positive effect of C g on the uniform phase distribution of matrix in the composites. The as-received SiC/SiC composites possess a density of 2.94 g/cm 3 with open porosity of 1.23%, and a flexural strength of 808.7±10.2MPa, a fracture toughness of 25.5±1.8MPa·m 1/2 , a tensile strength of 317.4±12.4MPa and a proportional ultimate stress of 157.33±4.1MPa. Acoustic emission (AE) and digital image correlation (DIC) technology are used to study the special mechanical behavior of composites.

Microstructure of C/SiC Braking Material

Microstructures and properties of C/C–SiC composites derived from different gaseous carbon matrix precursors

Mechanical Behavior of SiCf/SiC Composites with Alternating PyC/SiC Multilayer Interphases

Characterization of the Microstructure of Three‐Dimensional‐Needled Carbon/Silicon Carbide Composites

Mechanical and tribological properties of C/C–SiC ceramic composites with different preforms

Microstructure and mechanical properties of SiC f /SiC composite prepared by chemical vapor infiltration

Effects of carbon fiber dispersion on bending property of Cf/SiC brake materials

THE MICROSTRUCTURE AND THE PROPERTY OF SiC/Si LAMINATED CERAMIC COMPOSITES FROM PAPER

A novel porous carbon synthesized to serve in the preparation of highly dense and high-strength SiC/SiC by reactive melt infiltration

The structural effect of SiC form ceramic on the compressive strength and thermal expansion properties of Cu–SiC composites

Microstructure and Mechanical Properties of Cf/SiC Composites with Dispersed C-SiC Interphase Prepared by Chemical Vapor Infiltration

The Microstructure and Wear Characteristics of Cu–Fe Matrix Friction Material with Addition of SiC

Microstructure Characterization by X-Ray Computed Tomography of C/C-SiC Ceramic Composites Fabricated with Different Carbon Fiber Architectures

Microstructural Characterization of Sintered MoSi<sub>2</sub>/SiC<sub>P</sub> Composites

Fabrication and microstructure evolution of Csf/ZrB2-SiC composites via direct ink writing and reactive melt infiltration

Effects of Sintering Temperature on Bending Property of C-F/Sic Brake Material

Research Progress on Microstructure Characterization of Silicon Carbide Fibers

Formation mechanism of Si-Y-C ceramic matrix by reactive melt infiltration using Si-Y alloy and properties of C/Si-Y-C composites

Microstructures and mechanical properties of in-situ SiC-TiB2 ceramic composites fabricated by reactive melt infiltration

In-situ study of the fracture behavior of SiCf/SiC composite material under three-point bending

Effects of Sintering Temperature on Bending Property of C<sub>f</sub>/SiC Brake Material