Abstract:The thermal shock behavior of ZrB2-SiC-graphite (ZSG) composites was investigated in this study using a novel method of simulating complex thermal stress states that involved electric resistance heating followed by dynamic water cooling. The ZSG composites were heated and cooled to 1020–2020°C at a constant heating rate of ~134°C/s and a constant cooling rate of ~536°C/s. The residual strength of the composites decreased at temperature difference of 1000–1400°C. This weakening in strength was attributed to the multiple microcracks and flaws that were created by the two-dimensional thermal stresses and by the expanding and shrinking in the volume of the composites, attributed to chemical/physical reactions. Next, it was found that the residual strength of the composites increased at temperature difference of 1400–1700°C, due to the formation of a liquid SiO2 glass and the increase in the quantity of oxides both of which were favorable to healing the flaws and cracks. Finally, the residual strength decreased slowly at temperature difference above 1700°C, which was attributed to the ZrO2-induced crack healing. It was found that the thermal shock behavior of the ZSG composites depended on both the temperature difference and the mode of the thermal shock loading. The material was particular sensitivity to the regime of alternating heating and cooling, which would be similar to actual flight conditions.

Mechanisms of Thermal Shock Failure for Ultra-High Temperature Ceramic

Thermal Shock Stress Considering Dynamical Behavior for Ultra High Temperature Ceramic

The Influence of Surface Heat Transfer Conditions on Thermal Shock Behavior of ZrB2–SiC–AlN Ceramic Composites

Mechanism Analysis of Thermal Shock Properties for Zrb2-20%Sicp-10%Aln Ultra-High Temperature Ceramic with the Surface Defects

Experimental study on the influential factors of thermal shock resistance of ultra-high temperature ceramic composite materials

Thermal shock characterization of large size ZrB2 ceramic matrix composite material

Effect of graphite flake on microstructure as well as mechanical properties and thermal shock resistance of ZrB2–SiC matrix ultrahigh temperature ceramics

Effects of different additives on microstructure and crack resistance for an ultra-high temperature ceramic

Thermal shock resistance of ZrC matrix ceramics

Thermal shock resistance of a ZrB2-SiC-graphite composite in low oxygen partial pressure environment

Thermal shock behavior of ZrB2–SiC ultra-high temperature ceramics with addition of zirconia

Design and characterization of therm-al shock resistance of several typical zirconia reinforced alumina ceramic composites

Microstructure and thermal shock behavior of ZrB2–SiC–graphite composite

The Effect of the Additive to the Thermal Shock Resistance of Zirconia

Prediction of Crack Depth During Quenching Test for an Ultra High Temperature Ceramic

Effect of surface oxidation on thermal shock resistance of ZrB2–SiC–G composite

Thermal Shock Property of ZrB_2-Based Ultra-High Temperature Ceramics

A Novel Method to Evaluate the Thermal Shock Behavior of ZrB2-SiC-graphite Composites under Alternating Complex Thermal Stress Environments

The Evaluation of Reliability for Zirconium Diboride Composite with Additives of Graphite

Effect of Environment Atmosphere on Thermal Shock Resistance of the ZrB2–SiC–graphite Composite

Microstructural feature and thermal shock behavior of hot-pressed ZrB2–SiC–ZrO2 composite