Abstract:The thermal shock behavior of ZrB2-SiC-graphite (ZSG) composites was investigated in this study using a novel method of simulating complex thermal stress states that involved electric resistance heating followed by dynamic water cooling. The ZSG composites were heated and cooled to 1020–2020°C at a constant heating rate of ~134°C/s and a constant cooling rate of ~536°C/s. The residual strength of the composites decreased at temperature difference of 1000–1400°C. This weakening in strength was attributed to the multiple microcracks and flaws that were created by the two-dimensional thermal stresses and by the expanding and shrinking in the volume of the composites, attributed to chemical/physical reactions. Next, it was found that the residual strength of the composites increased at temperature difference of 1400–1700°C, due to the formation of a liquid SiO2 glass and the increase in the quantity of oxides both of which were favorable to healing the flaws and cracks. Finally, the residual strength decreased slowly at temperature difference above 1700°C, which was attributed to the ZrO2-induced crack healing. It was found that the thermal shock behavior of the ZSG composites depended on both the temperature difference and the mode of the thermal shock loading. The material was particular sensitivity to the regime of alternating heating and cooling, which would be similar to actual flight conditions.

Effect of graphite flake on microstructure as well as mechanical properties and thermal shock resistance of ZrB2–SiC matrix ultrahigh temperature ceramics

Mechanical Properties and Thermal Shock Resistance of ZrB2–SiC Ceramic Toughened with Graphite Flake and SiC Whiskers

Effect of graphite flake on the mechanical properties of hot pressed ZrB2–SiC ceramics

Effects of graphite flake diameter on mechanical properties and thermal shock behavior of ZrB2-nanoSiC-graphite ceramics

Microstructure and thermal shock behavior of ZrB2–SiC–graphite composite

Thermal shock resistance of ZrC matrix ceramics

Fabrication, Mechanical Properties and Thermal Shock Resistance of a ZrB2-graphite Ceramic

Transmission electron microscopy characterization of effect of graphite in zrb 2 – based composites

THERMAL SHOCK BEHAVIOR OF <font>ZrB</font><sub>2</sub>-20<font>vol</font>.%<font>SiC</font>-15<font>vol</font>.% GRAPHITE FLAKE BY HOT PRESSING

Effect of surface oxidation on thermal shock resistance of ZrB2–SiC–G composite

Microstructure, Mechanical Properties and Thermal Shock Resistance of Zirconium Diboride Containing Silicon Carbide Ceramic Toughened by Carbon Black

Thermal shock resistance of a ZrB2-SiC-graphite composite in low oxygen partial pressure environment

Thermal Shock Behavior Of Zrb2-20vol.% Sic-15vol.% Graphite Flake By Hot Pressing

Electrostatic Assembly Preparation of High-Toughness Zirconium Diboride-Based Ceramic Composites with Enhanced Thermal Shock Resistance Performance

Influence of graphite on the low-frequency fatigue behavior of zirconium diboride ceramics

Effect of SiC Content on Mechanical Properties and Thermal Shock Resistance of BN–ZrO2–SiC Composites

Effects of Short Carbon Fiber on Mechanical Properties of ZrB2-SiC Ultra-high Temperature Ceramics

A Novel Method to Evaluate the Thermal Shock Behavior of ZrB2-SiC-graphite Composites under Alternating Complex Thermal Stress Environments

Mechanical properties and thermal shock behavior of hot-pressed ZrB2–SiC–AlN composites

Microstructure and Thermal Shock Resistance of Zr7/8Ti1/8B2-20 Vol% SiC Composites Synthesized by Mechanical Alloying and Spark Plasma Sintering

Effects of different additives on microstructure and crack resistance for an ultra-high temperature ceramic