Abstract:A rapid thermal processor (RTP) device as well as quenching technique is employed to systematically investigate the effect of surface heat transfer coefficient (h) gradient on thermal shock failure of a hot-pressed ZrB2-based ceramic. Two typical kinds of quenchant with different surface h gradients during quenching tests, water and boiling water, are used for this study. When water as the cooling medium, two different cooling modes of indirect contact cooling by RTP device and direct contact cooling by quenching are also studied. The experimental results and related numerical simulations illustrate that surface h gradient plays an important role in thermal shock failure. This study confirms the previous presumption that the combination of body temperature gradient and surface h gradient leads to thermal stress damage and thermal shock failure. Under water quenching condition, water phase changes form bubbles randomly and produce great surface h gradient. Accordingly, critical body temperature gradient (V(max)(c)) is small (similar to 270 degrees C s(-1)). Under aqueous polymer quenching condition, the introduction of polymer chains into water lowers the random formation of steam bubble and mediates the surface h gradient. The corresponding V(max)c hence become larger (similar to 500 degrees C s(-1)) Under boiling water quenching condition, there is no surface h gradient and V(max)(c) is even larger (>600 degrees C s(-1)). This study provides useful complementary information for understanding the thermal shock behavior and gives suggests for predicting materials performance in actual service.

The Influence of Surface Heat Transfer Conditions on Thermal Shock Behavior of ZrB2–SiC–AlN Ceramic Composites

Effect of repeated thermal shock on mechanical properties of ZrB2-SiC-BN ceramic composites

Enhanced thermal shock resistance of BN-based composites sintered by hot-pressing with the introduction of nano oxides

An Aqueous Polymer Quenching Medium for Instantaneous Thermal Shock Cooling Rate Study of Ceramic Materials

Thermal shock behavior of SiC-whisker-reinforced diboride ultrahigh-temperature ceramics

Thermal Shock Behavior of Zrb2-Sic Ceramics with Different Quenching Media

The Effect of MoAlB Substitutions on the Oxidation Behavior of ZrB2-SiC Composites at 1600°C

Design and characterization of therm-al shock resistance of several typical zirconia reinforced alumina ceramic composites

Effect of SiC Content on the Ablation and Oxidation Behavior of ZrB2-Based Ultra High Temperature Ceramic Composites

Enhanced thermal shock resistance of ZrO2-reinforced Al2O3–CaAl12O19 composites prepared from ferrotitanium slag: Crack propagation resistance mechanisms

Effect of Surface Heat Transfer Coefficient Gradient on Thermal Shock Failure of Ceramic Materials under Rapid Cooling Condition

Preparation and thermal shock resistance investigation of ZTA-La 2 O 3 composite ceramics for porous medium combustion materials

Effects of ZrB2 on Mechanical Properties of Al2O3-ZrB2-SiC Composite Ceramics at Room Temperature

Isothermal Oxidation of Zr2[Al(Si)]4C5–SiC Composites at 1000–1300°C in Air

Effect of surface brittle-to-ductile transition on high-temperature thermal shock resistance of Al2O3 ceramics

Preoxidation and Crack-Healing Behavior of ZrB<sub>2</sub>-SiC Ceramic Composite

Study on Thermal Shock Resistance and Oxidation Resistance of Ultra-High Temperature Ceramics

Thermal Shock Behavior of Sic Whisker Reinforced Si3n4/Bn Fibrous Monolithic Ceramics

Aluminum nitride‐based ceramics with excellent thermal shock resistances

Thermal shock damage assessment of a BNW/SiO2 ceramic: Insight from temperature-dependent material properties

Preparation and flame ablation/oxidation behavior of ZrB2/SiC ultra-high temperature ceramic composites