Abstract:The central problem of using ceramic as a structural material is its brittleness, which associated with rigid covalent or ionic bonds. Whiskers or fibers of strong ceramics such as silicon carbide (SiC) or silicon nitride (Si3N4) are widely embedded in a ceramic matrix to improve the strength and toughness. The incorporation of these insulating fillers can impede the thermal flow in ceramic matrix, thus decrease its thermal shock resistance that is required in some practical applications. Here we demonstrate that the toughness and thermal shock resistance of zirconium diboride (ZrB2)/SiC composites can be improved simultaneously by introducing graphene into composites via electrostatic assembly and subsequent sintering treatment. The incorporated graphene creates weak interfaces of grain boundaries (GBs) and optimal thermal conductance paths inside composites. In comparison to pristine ZrB2-SiC composites, the toughness of (2.0%) ZrB2-SiC/graphene composites exhibited a 61% increasing (from 4.3 to 6.93 MPa·m(1/2)) after spark plasma sintering (SPS); the retained strength after thermal shock increased as high as 74.8% at 400 °C and 304.4% at 500 °C. Present work presents an important guideline for producing high-toughness ceramic-based composites with enhanced thermal shock properties.

The Evaluation of Reliability for Zirconium Diboride Composite with Additives of Graphite

Thermal Shock Stress Considering Dynamical Behavior for Ultra High Temperature Ceramic

Influence of graphite on the low-frequency fatigue behavior of zirconium diboride ceramics

Mechanisms of Thermal Shock Failure for Ultra-High Temperature Ceramic

Effect of graphite flake on microstructure as well as mechanical properties and thermal shock resistance of ZrB2–SiC matrix ultrahigh temperature ceramics

Analysis of the Mechanical Properties in Short Carbon Fiber-toughened ZrB2—SiC Ultra-high Temperature Ceramic

Prediction of Crack Depth During Quenching Test for an Ultra High Temperature Ceramic

Effects of different additives on microstructure and crack resistance for an ultra-high temperature ceramic

Electrostatic Assembly Preparation of High-Toughness Zirconium Diboride-Based Ceramic Composites with Enhanced Thermal Shock Resistance Performance

Effects of Short Carbon Fiber on Mechanical Properties of ZrB2-SiC Ultra-high Temperature Ceramics

Thermal shock resistance of ZrC matrix ceramics

Mechanisms of Material Failure for Fast Heating Up at the Center of Ultra High Temperature Ceramic

Design and characterization of therm-al shock resistance of several typical zirconia reinforced alumina ceramic composites

Effects of ZrB2 on Mechanical Properties of Al2O3-ZrB2-SiC Composite Ceramics at Room Temperature

High‐temperature tensile strength and fracture behavior of ZrB2‐SiC‐graphite composite

A New Method for Determining Strength and Fracture Toughness of Ceramic Materials in Air at 1500-2000 °C

Mechanical Properties and Thermal Shock Resistance of ZrB2–SiC Ceramic Toughened with Graphite Flake and SiC Whiskers

An experimental study of ultra-high temperature ceramics under tension subject to an environment with elevated temperature, mechanical stress and oxygen

Achieving synergy of load-carrying capability and damage tolerance in a ZrB2-SiC composite reinforced through discontinuous carbon fiber

Mechanical Properties and In-Situ Toughening Mechanism of Pressurelessly Densified ZrB2–TiB2 Ceramic Composites

Dynamic Compressive Behavior of ZrB2‐Based Ceramic Composites at Room Temperature and 1073 K