Abstract:Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, Ahead of Print. In order to study the dynamic behaviour of a vehicle passing through turnouts under traction and braking conditions, as well as its influence on the wear of turnout rails, a high-speed vehicle-turnout rigid-flexible coupling dynamic model is established based on the coupling dynamic theory of vehicle and turnout, using China's No. 18 high-speed turnout and CRH380 high-speed EMU as prototypes. The model is used to analyse wheel-rail creep characteristics, wheel-rail contact mechanics, and wheel-rail wear under traction and braking conditions. The results indicate that when a high-speed train passes through a turnout under traction or braking conditions, the longitudinal creepage of the wheel-rail will change due to the rotative speed difference generated by traction or braking. Furthermore, due to the existence of the lead curve, the longitudinal creep rate of the wheel-rail becomes even more complex when passing through the turnout in the diverging route. The calculations reveal that the traction behaviour of the train leads to a significant increase in wear at the front of the switch rail and nose rail, while the wear number of the switch rail in the heel of the frog after 6m increases significantly under braking conditions. The different impact characteristics of vehicle traction and braking conditions on turnout rail wear obtained in this study can provide guidance for optimizing and grinding the profiles of turnout rails at the throat of railway stations.

Reinforced Design of Traction Link Seat for 6K Electric Locomotive

EXPERIMENTAL RESEARCH AND FINITE ELEMENT ANALYSIS ON A WELDED JOINT WITH TUBES INTERSECTED AT TWO DIFFERENT POINTS

Experimental research and finite element analysis on tubular joints of Hangzhou East Railway Station

STUDY ON SOME KEY PROBLEMS RELATED TO CRANE BEAM-RAIL SYSTEM UNDER WHEEL PRESSURE

Structure design of LFT passenger car seat structure based on topology optimisation

Structural Design of Electric Locomotive Car Body Underframe

An Investigation into Structural Failures of Chinese High-Speed Trains

Research on the longitudinal mechanical behaviours of subway turnouts of large slope under train braking force

Explicit Dynamics Simulation of High-Speed Railway Bearing Based On ANSYS/LS-DYNA

Simulation Analysis and Experimental Study of the Strength of Aluminum Alloy Suspension Structure

Structure Design and Optimization Analysis of Car Body for Heavy Load Electric Locomotive

Static Analysis and Structural Optimization of Traction Gearbox for Concentrated Load Locomotive

Structure Optimization and Strength Calculation for Type SS4 Modified Locomotive's Car Body

The Fatigue Research of Straight Thread Sleeve Connection for Beijing South Railway Station

Detailed Model and Traction Performance Test on Interaction Between Track Link and Ground

Numerical analysis on the stress field of vehicle chassis of high-speed train under load

Dynamic wheel-rail interaction of a train crossing a turnout under traction/braking behaviour and research on rail wear of the turnout

Research on Fatigue Damage Evolution of the Base Plate Structure of China Railway Track System III Type Slab Ballastless Track under Heavy Haul Train Load

Strength and Modal Analysis for Carbody Structure of Overhead Contact System Maintenance Vehicle

Strength Check Analysis of Axle Box and Bolted Joints of High-Speed Motor Trains

Investigation of the Fatigue Behaviour of a Ballastless Slab Track–Bridge Structural System under Train Load