Abstract:A new technique and an application program for automating the programming of the milling operation during virtual basing of the workpiece on the CNC machine table is presented, when precise installation of the workpiece along the coordinate axes of the machine is difficult. The solution of such a scientific and technical problem allows you to perform contour milling of parts with their arbitrary location on the table of the CNC machine with guaranteed alignment of the allowance along the forming path. The method involves the sequential implementation of three stages with parallel use of the created application program. At the first stage, an electronic copy of the part drawing is prepared, which contains the selected part and workpiece contour highlighted in different colors. Thus, the scanning provides automatic creation of digital two-dimensional arrays of geometric images necessary to solve the problem. At the second stage, the coordinates of three points of the workpiece measured by the probe on the machine are entered into the created program. Based on the entered data, the created program solves the problem of alignment of the allowance using the Gauss-Seidel method using the Hausdorff dimension. This approach allows us to obtain a quantitative estimate of the similarity of polygonal objects, which is necessary to solve the problem of minimax location of the allowance. The task is to determine the correction of the control program for two linear coordinates and one angular around the center of mass of the workpiece. At the third stage, the correction values calculated in the program are entered into the CNC rack of the machine and the processing of the contour begins. The proposed technique and the created application program were tested when processing the part contour on a VF-3 HAAS milling machine. Practical testing has shown the effectiveness of the technique, which is to ensure milling without overloading the tool and reduce the processing time during virtual basing of the workpiece

Three Groups Working Programs Based on Feature Template

RESEARCH ON THE PRINCIPLE OF GEOMETRICAL DESIGNING AND CNC MACHINING ABOUT POLYGON ARC-TYPED SECTIONS

Numerical Control Programming Oriented to Customized Product

Study on Computer Aided Programming Software of CNC Based on Image Processing

Iso-Parametric Tool Path Planning for Five-Axis Compound Surface Machining

A NC Composite Programming System Based on NC Subprogram-base

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

The study of CAD/CAM system of super CNC glass carve center

Study on Numerical Control Machining Technology of Toy Car Cover

Research of Hybrid NC Programming Technology for Lathe Machining Center

Research and Application of CNC Machining Method Based on CAD/CAM/Robot Integration

A Software Design Based on the Projective Water-jet Cutting NC Machine

STEP-NC Controller & Its Toolpath Planning Method

Contour milling programming technology for virtual basing on a CNC machine

Research on Free-form Surface CAD/CAM/CNC Integrated System

The Definition and Implementation of NC Feature Unit and Its Application

Rough NC machining programming based on triangular Bézier surface

A 3-D Simulation System for Milling Machining Based on STEP-NC

Turn-milling Machining Based on UG and VERICUT

A Parameterized Automatic Programming Solution for Composite Grinding Based on Digital Image Processing

Extension and Application of Turning Features Based on STEP-NC