Abstract:The toolpath generation for compound surface is a complicated task for five-axis manufacturing, especially in high-speed machining. The toolpath efficiency is not only determined by its geometry pattern but also affected by its trajectory interpolation result. Besides, the trimmed patches of sub-surfaces increase the difficulty of planning the toolpaths on the whole surface. The traditional way like iso-parameter method or iso-planar method is blocked by the compound surface’s incomplete parameter domain or the splicing boundary. To handle these problems, a labeled grid-based method is proposed in this paper to identify the sub-surface’s parameter boundary at first. Then, the trimmed boundary of the parameter zone is acquired by a searching method. Secondly a specification of topology description is given to manipulate the patch across problem. After the geometry issues are solved, the final toolpaths which constrained by the machine tool’s dynamic characteristics are generated; this stage includes three main steps: (1) the connection of the cutter contact points, especially connecting the points cross the patched; (2) the toolpath pattern selection, according to the machining efficiency; and (3) the whole toolpaths generation. The salient advantage of this method is that the toolpath planning is conducted in a whole parameter zone which composes of each sub-surface, so the obtained toolpaths are smoother and take the compound surface’s geometry features into account. Finally, the proposed method is verified by a C++ program.

Rough NC machining programming based on triangular Bézier surface

Non-redundant tool trajectory generation for surface finish machining based on geodesic curvature matching

Some Simplified Approaches for NC Tool Path Generation in Reverse Engineering

Improving the Efficiency of Solid-Based NC Simulation by Using Spatial Decomposition Methods

Exploratory Study of Spiral Nc Tool Path Generation on Triangular Mesh Based on Local Subdivision

Mixed Tiny Path Smoothing Method Based on Sliding Convolution Windows for CNC Machining

A feedback toolpath generation method for compound trimmed surface with machine’s dynamic characteristics confined

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

Smooth Fillet-End Cutter Tool Path Generation Method on Triangular-Mesh Surface Based on Modified Butterfly Subdivision

Study on Analytical Model of Surface Roughness Prediction in NC Machining

The Cutter Envelope Surface Calculation of Multi-Axis NC Machining

A generic uniform scallop tool path generation method for five-axis machining of freeform surface.

A Novel Method of Efficient Machining Error Compensation Based on Nurbs Surface Control Points Reconstruction

Iso-Parametric Tool Path Planning for Five-Axis Compound Surface Machining

The Tool Paths Generation Approach Based on Level-Set Methods in Die-Cavities NC Machining

Modeling Cutter Engagement Region for Triangular Mesh

Parallelly Generating Nc Tool Paths for Subdivision Surfaces

Surface Reconstruction Technique IGES Output Oriented

Machined Nurbs Surface Description Using On-Machine Probing Data

Research on Inverse Evaluation Mechanism in Toolpath Generation Based on Global Interpolation Simulation

Five-axis Tool Path Generation in CNC Machining of T-spline Surfaces