Abstract:A new technique and an application program for automating the programming of the milling operation during virtual basing of the workpiece on the CNC machine table is presented, when precise installation of the workpiece along the coordinate axes of the machine is difficult. The solution of such a scientific and technical problem allows you to perform contour milling of parts with their arbitrary location on the table of the CNC machine with guaranteed alignment of the allowance along the forming path. The method involves the sequential implementation of three stages with parallel use of the created application program. At the first stage, an electronic copy of the part drawing is prepared, which contains the selected part and workpiece contour highlighted in different colors. Thus, the scanning provides automatic creation of digital two-dimensional arrays of geometric images necessary to solve the problem. At the second stage, the coordinates of three points of the workpiece measured by the probe on the machine are entered into the created program. Based on the entered data, the created program solves the problem of alignment of the allowance using the Gauss-Seidel method using the Hausdorff dimension. This approach allows us to obtain a quantitative estimate of the similarity of polygonal objects, which is necessary to solve the problem of minimax location of the allowance. The task is to determine the correction of the control program for two linear coordinates and one angular around the center of mass of the workpiece. At the third stage, the correction values calculated in the program are entered into the CNC rack of the machine and the processing of the contour begins. The proposed technique and the created application program were tested when processing the part contour on a VF-3 HAAS milling machine. Practical testing has shown the effectiveness of the technique, which is to ensure milling without overloading the tool and reduce the processing time during virtual basing of the workpiece

Turn-milling Machining Based on UG and VERICUT

CNC Machining Simulation Base on UG and VERICUT

Simulation Verification of Parts Processing Based on Virtual Numerical Control Machine

Development of Machining Simulation Module of Open CNC

Post-processing of a nine-axis and five-linkage turn-milling compound machine tool

Research on the Simulation of NC Milling Program Based on VERICUT Oriented to the Five-Axis Micro-Milling System

Digital Design and Simulation Based on UG for CNC Milling Machine

Study and Development of Automatic Control System for Chamfering Machine Based on PLC

Simulation of VERICUT-based Generating Grinding of Involute Beveloid Gears

Automated Process Planning for Turning: A Feature-Free Approach

A precision CNC turn-mill machining center with gear hobbing capability

Machining with a Precision Five-Axis Machine Tools Created by Combining a Horizontal Parallel Three-Axis Motion Platform and a Three-Axis Machine Tools

Research on CAM of Generating Manufacturing Spiral Bevel Gear Based on Machining Center

An Optimisation Algorithm for Reducing the Number of Turns on Space-Filling Curve Toolpath for Sculptured Surface Milling

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

Velocity Planning Algorithm for High Speed Machining of Micro Line Blocks Based on Cubic Polynomial Model

Study on the Method of Increasing Turning Velocity During CNC Continuous Machining

Contour milling programming technology for virtual basing on a CNC machine

The Structure and Morphological Analysis of the Machining Center and Its Emulation Design