Abstract:The single-pass welding thermal simulation test of V-N micro-alloyed steel was carried out by MMS-300 thermal simulation testing machine, and combined with an optical microscope (OM), electron backscattering diffraction, impact test, and other technologies, to study the organization, toughness, and its change rule of critical reheating coarse-grained heat-affected zone under different welding conditions. The results show that the microstructure of single-pass simulated CGHAZ is composed of polygonal ferrite, acicular ferrite, bainite beam, and a small amount of lath martensite at low and medium linear energies. The precipitates in the heat-affected zone of coarse grain in single-pass welding are mainly VN or V(C, N). The microhardness and high-angle grain boundary fraction (> 15°) of CGHAZ decrease with the increase in welding heat input. When t 8/5 is 10 s, the microstructure is dominated by fine lath bainite, and a large number of high-angle grain boundaries exist between the lath strands in different microstructure, which can effectively hinder crack propagation. With the increase in t 8/5 , that is, the increase in welding line energy, the lamellar structure decreases obviously, and the proportion of low-angle grain boundary is higher. Meanwhile, the M/A island hard phase inside the granular bainite reduces the free slip path of the plastic ferrite phase during deformation, which is difficult to prevent crack extension and deteriorates the toughness, and the weld thermal cycling process destroys the strength and toughness equilibrium of the V-N micro-alloyed high-strength candidate steel.

Structure Character of M-A Constituent in CGHAZ of New Ultra-Low Carbon Bainitic Steel under Laser Welding Conditions

Study on Laser Welded Heat-Affected Zone in New Ultralow Carbon Bainitic Steel

Microstructure and Mechanical Properties of Laser Welded Heat-Affected Zone in New Ultra-Low Carbon Bainitic Steel

Microstructure and Mechanical Properties of Laser Welded Joint of NULCB Steel

Microstructure and Properties of Coarse Grain Zone in Single-Pass Welding of V-N Microalloyed Steel

Effect of the Cooling Rate of Thermal Simulation on the Microstructure and Mechanical Properties of Low-Carbon Bainite Steel by Laser-Arc Hybrid Welding

Toughness of Heat-Affected Zone of 800 Mpa Grade Low Alloy Steel

Significant influence of heat input on microstructure evolution and mechanical properties of the simulated CGHAZ in a 1000 MPa grade ultra-high strength steel

Microstructure and mechanical properties of laser welded CGHAZ of RPC steel

A comparative study of the microstructure and properties of 800 MPa microalloyed C-Mn steel welded joints by laser and gas metal arc welding

Effect of undercooled austenite ausforming on the role of the M–A constituents in the CGHAZ toughness of the HSLA steels with bainite structure

Low-temperature impact toughness of laser–arc hybrid welded low-carbon bainitic steel

Microstructure and Toughness of the CGHAZ of an Offshore Platform Steel

Comparison of Microstructure and Mechanical Properties of Ultra-Narrow Gap Metal Active Gas Arc Welded and Narrow Gap Submerged Arc Welded Q235A Low Carbon Steel

Elucidating the heat input on CGHAZ microstructure and its irregular effect on impact toughness for a novel V-N microalloying weathering steel

Microstructure and mechanical properties of thermal simulation CGHAZ of DP780 high strength steel

Mechanism of Interfacial Microstructure Evolution of G115 Steel in Simulated Heat Affected Zone

Favorable Impact Toughness of High Heat Input Coarse-Grained HAZ in an Ultra-Low Carbon High-Strength Microalloyed Steel

A comparative study on microstructure and mechanical properties of HG785D steel joint produced by hybrid laser-MAG welding and laser welding

Microstructure and Toughness of Laser Welded Joint of 400mpa Ultra-Fine Grained Steel

Effect of Initial Microstructure on the Toughness of Coarse-Grained Heat-Affected Zone in a Microalloyed Steel