Abstract:Ti–Mn-based hydrogen storage alloys are considered to be one of the most promising hydrogen storage alloys for proton exchange membrane fuel cell applications, because of their good hydrogen absorption and desorption kinetics, low price, good activation performance, possession of high electrochemical capacity, and good cycling performance. The structure, performance characteristics, crystal structure of hydrides, development and application status of Ti–Mn-based hydrogen storage alloys were reviewed, and the methods to improve Ti–Mn-based hydrogen storage alloys were discussed: optimization of the preparation process, element substitution, and surface treatment. (1) In the study of the alloy preparation process, it was found that the use of the annealing process can significantly improve the high rate discharge performance, and cycling stability performance, increasing the maximum discharge capacity of the alloy electrode. In addition, using vacuum plasma spraying to prepare the electrode has better cycling stability and kinetic performance. (2) In element substitution, the effects of using Zr elements to partially replace Ti and Mn with Cr, V, Mo, and Fe on the hydrogen storage properties of Ti–Mn-based alloys were investigated. (3) In the study of surface treatment, palladium was plated on the surface of TiMn1.5 alloy by chemical deposition, and the strong affinity of palladium for hydrogen accelerated the cleavage of hydrogen molecules, which significantly improved the hydrogen absorption kinetics of TiMn1.5 alloy. Meanwhile, a new binary alloy system was formed by adding TiMn2 to MgH2, and it was shown that the addition of TiMn2 significantly improved the hydrogen absorption/desorption kinetics of the MgH2 alloy. Finally, the prospect of the application of Ti–Mn-based hydrogen storage alloys is presented, and the insight of further development of the alloy is offered.

Phase Structure and Hydrogen Sorption Performance of Ti–Mn-based Alloys

Experimental and Theoretical Investigation on the Enhanced Hydrogen Storage Performance of Ti–Cr–Mn–Fe-Based Alloys Modified by Nb Substitution

Phase Structures and Hydrogen Storage Properties of TiV1.35Cr1.35-xMnx Alloys(x=0～0.45)

Phase structures and hydrogen storage properties

Development of Ti–Zr–Mn–Cr-(V–Fe) Based Alloys for Hydrogen Feeding System in Hydrogen Metallurgy Application

Hydrogen Storage Properties of Ti-Cr-Mn-M (M=V, Fe, Ni, Cu) Alloys

Hydrogen Storage Properties and Crystal Structure of Ti-Cr Based Alloys

Microstructure and hydrogen storage properties of Ti1.0VxMn2-x(x=0.6-1.6) alloys

Hydrogen storage properties of V+TiFe0.85Mn0.15 multi-phase alloys

Hydrogen storage properties of TiMn2-based alloys

Microstructure and hydrogen storage properties of Ti1.0VxMn2-x(x=0.6 similar to 1.6) alloys

Phase structures and electrochemical behaviors of V2.1TiNi 0.5Hf0.05Crx (x=0-0.152) hydrogen storage alloys

Enhancement of Hydrogen Storage Capacity of Ti–V–Cr–Mn BCC Phase Alloys

Hydrogen Storage Characteristics of TiMn1.25-5yCr0.25(V4Fe)y Alloys

Microstructures and Hydrogen Storage Properties of Ti10V83-xFe6ZrMnx Alloys

Effect of Cr Content on the Sorption Performance of Timn1.2-Xcrxv0.25fe0.05

EFFECT OF Cr CONTENT ON THE SORPTION PERFORMANCE OF TiMn_(1.2-x)Cr_xV_(0.25)Fe_(0.05) ALLOYS

The Effects of Partial Substitution of Mn by Cr on the Phase Structure, Microstructure and Electrochemical Properties of Ti-Zr-V-Mn-Ni Hydrogen Storage Alloys

Phase Structures and Electrochemical Properties of V2.1TiNi0.4Zrx (x=0−0.06) Hydrogen Storage Electrode Alloys

Research and application of Ti–Mn-based hydrogen storage alloys

Influence of Ti Super-Stoichiometry on the Hydrogen Storage Properties of Ti1+xCr1.2Mn0.2Fe0.6 (x = 0–0.1) Alloys for Hybrid Hydrogen Storage Application