Abstract:A large amount of industrial solid waste (including waste plastics, textiles, wood, etc., which are byproducts of industrial production) urgently needs to be treated. Incineration is undoubtedly the most efficient and convenient method. The existing municipal solid waste incineration plants can be transformed to burn such industrial wastes. However, the potential risks associated with high levels of heavy metals in industrial waste and the air pollution caused by co-incineration pose significant challenges to the co-incineration disposal of industrial solid waste. The change of physical and chemical properties of municipal solid waste and the emission characteristics of flue gas pollutants after co-incineration of industrial waste were studied by means of material flow simulation and experiment. In addition, experiments were designed to study the effects of temperature, calcium sulfur ratio and chlorine content on heavy metal emission during the incineration of industrial waste. The results showed that co-incineration of a certain proportion of industrial waste significantly increased the calorific value of municipal solid waste, but excessive mixing of plastic and paper industrial waste would increase the ash content. Co-incineration of plastic industrial waste can significantly increase HCl, and with the increase of temperature, the transformation of Cl to HCl is more thorough. The increase of temperature can promote the migration of Cr, Pb and Se elements to the gas phase. When Cr, Pb, and Se elements are present in the gas phase, they can combine with other gases and aerosols to form particulate matter and toxic substances, causing air pollution. When Ca/S is 1, Ba, Mn, Ni, Zn can effectively reduce the retention rate of elements in the ash. Under certain conditions, chlorine in industrial waste plastics will react with Zn to form tiny particles and low boiling point chlorides, which will increase its volatility. The mineral components in the ash can also be used for making ceramsite and building materials. These results will provide reference for the pollutants controlling during co-incineration of industrial waste and municipal solid waste process.

Emission characters of HCl during paper mill plastic waste incineration

[Experimental and Mechanism Analyses on HCl Emission Control During PVC Combustion in Fixed Beds].

Experimental Study on HC1 Real-time Emission Characteristics in Simulated Municipal Solid Waste Incineration

HCl EMISSION DURING CHLORIDE WASTES COMBUSTION PROCESS

The Emission of Fluorine Gas During Incineration of Fluoroborate Residue.

HCl and PCDD/Fs emission characteristics from incineration of source-classified combustible solid waste in fluidized bed

Study on the Evolution and Transformation of Cl During Co-incineration of a Mixture of Rectification Residue and Raw Meal of a Cement Kiln.

Thermal Characteristics, PCDD/F Formation, and PCDD/F Inhibition in the Incineration of Distillation Residue from Chemical and Coal Industries

HCl Emission and Its Influence on the Transformation of Heavy Metals' Speciation During the Incineration of Dyestuff Residue

Experimental Study of Emission of HCl on Incinerating of Typical Municipal Solid Waste Components

Behavior and Control of Chlorine in Dyestuff Residue Incineration

Experimental Study of HCl Emission and Removal on Incinerating of Typical MSW Components in Fluidized Bed

Inorganic chlorine released from typical components of medical waste in pyrolysis/incineration

Dichlorination in a Circulating Fluidized-Bed Incinerator for Municipal Solid Waste Incineration System

Experimental Research on Emission and Capture of HCl in MSW Incineration

Study on the Evolution and Transformation of Chlorine During Co-Processing of Hazardous Waste Incineration Residue in a Cement Kiln

Release of Hydrogen Chloride from Combustibles in Municipal Solid Waste.

B202 In-furnace Reduction of HCI Emission by Alkali-based Sorbents During PVC Combustion in Fixed Bed

Study on the Melting Characteristics of Slag from the Incinerator of Hazardous Wastes Containing Fluorine and Chlorine

The impact of pollutant emissions from co-incineration of industrial waste in municipal solid waste incinerators

Review on the Emission and Dechlorination of HCl in Combustion of MSW